Obormotov Posted April 1, 2023 Share #721 Posted April 1, 2023 On 10/20/2014 at 1:41 AM, guraus said: Maury, thanks for the advice. I will look for the orange oil and give it a try. Done the beams for the upper deck and switched to something different as I decided to do the lower masts. Started with the main one but I had to improvise a bit as my wood lathe was not long enough for it. Here are some progress pictures: Oh, my fault, I didn't look carefully. Everything is as I expected. The masts are the same as the whole ship. Just like they should be, only on a smaller scale. I'm sorry. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Obormotov Posted April 1, 2023 Share #722 Posted April 1, 2023 On 1/25/2015 at 3:59 PM, guraus said: ... Hi people! But what about artillery?🤔? artillery on the lower deck? Quote Link to comment Share on other sites More sharing options...
Obormotov Posted April 11, 2023 Share #723 Posted April 11, 2023 On 22.12.2013 at 05:51, guraus said: Всем здравствуйте, Спасибо за комментарии и интерес к моей сборке. Вот небольшое обновление с прогрессом на главном шпиле. Еще не доделал, но пока сделал шпиндель из квадратного куска самшита на токарном станке. Далее я перемалывал 10 щенков на нижней палубе и 12 на средней палубе. Барабан нижней деки имеет 12 квадратных отверстий для стержней. Первоначально я хотел сделать это из двух частей, каждая из которых вырезала половину толщины стержня, как вы можете видеть на рисунке 7. Проблема заключалась в том, что две половины не шлифовались, поэтому я не мог выровнять квадратные отверстия. Так что я сделал следующую лучшую вещь - вырезал пазы глубже только на нижней половине, а затем приклеил верхнюю часть, которая была простым диском. Канавка в верхней части барабана была снабжена кольцом из черного дерева, отфрезерованным по размеру и приклеенным на место. Это все, что мне удалось сделать, но я продолжу завтра. Спасибо Александру That's so beautiful! I assume that you are God... in a civilization of very small beings. these creatures are fifty times smaller than us ordinary people. These creatures do all the work, they are small and it is not difficult for them. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Obormotov Posted April 11, 2023 Share #724 Posted April 11, 2023 1 minute ago, Obormotov said: That's so beautiful! I assume that you are God... in a civilization of very small beings. these creatures are fifty times smaller than us ordinary people. These creatures do all the work, they are small and it is not difficult for them. And the machines, tools, devices are a distraction mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Obormotov Posted April 11, 2023 Share #725 Posted April 11, 2023 On 02.02.2014 at 01:30, guraus said: Всем здравствуйте, Вот несколько фотографий прогресса. Спасибо. I just don't understand how you do it....! mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Mic_Nao Posted April 11, 2023 Share #726 Posted April 11, 2023 Very nice ! mtaylor and Obormotov 2 Quote The best aperitif is not necessarily the most expensive, it's the one we share! https://modelshipworld.com/topic/34058-frigate-l-egyptienne-1799-scale-148-by-mic_nao/#comment-969607 Link to comment Share on other sites More sharing options...
Obormotov Posted April 13, 2023 Share #727 Posted April 13, 2023 Hello Dear Guraus! First of all, I want to apologize for my English, I studied English at school, as a result, I can only use the language with the Electronic Translator. Excuse me, please. I really hope that everything is fine with you, and life is developing, as you see. I recently became interested in modeling again. And in particular sudomodelizm. True, in childhood, in 1980, at the age of nine, he was engaged in practice and theory in a children's ship modeling circle (as a child). Collected and glued plastic ships. I'm talking about myself for so long... because I'm now an old grandfather with insanity... of course, this is a joke! I just don’t know, I can’t find the right words to describe the emotions that I experience when I see your Victoria. It is made in such a way that when I look at it, it seems that I am a little man, an inch tall, and I was inside a ship under construction. And someone is giving me a tour. Have to be careful! Danger lives inside the ship. Predator. He doesn't mind having lunch with me! I remember that! Please make me a 1:48 scale halberd. For self-defense... . I can't imagine how much patience and perseverance and love you put into Victory's ship. You are the Master. I discovered your site, there are other models there. I will study. I will do the tour. And your Victory model can and should be shown, demonstrated as a tutorial on shipbuilding. In schools and technical schools, museums. And as a textbook for cabinet makers. (I'm not sure that the machine translated correctly, so I want to write options below: wood jeweler, wooden structure inlay. ) Your ship, every board, every surface, is neat and beautiful, elegant. And, no kidding: very small people, 48 times smaller than usual, sawed, planed, adjusted the details of the ship. I sometimes think so. Well, how else, in the gaps, in the grooves of the frame beams, you can not insert a sheet of paper, everything is worked out to the smallest detail. Made with the greatest diligence. Thank you so much for your hard work and patience! You have a beautiful magnificent ship! Please accept my congratulations and best wishes! Now I'm a big fan of your talent. Sincerely, Obormotov / Egor, Russia, Moscow / Mordor.🤗 mtaylor and dvm27 2 Quote Link to comment Share on other sites More sharing options...
Valter64ita Posted October 3, 2023 Share #728 Posted October 3, 2023 WOW, SIMPLY WOW!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.