ppddry
-
Posts
42 -
Joined
-
Last visited
Reputation Activity
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2012-02-20 to 25: working on the steering gear
2012-02-25: changed the color scheme
-
ppddry got a reaction from Bill Morrison in HMS Pandora 1779 in 3D
Thank you, David!
At the beginning I was not sure about how to draw this in 3D either. And I tested quite a few methods until I found the one that works for me.
Jingyang
-
-
ppddry got a reaction from KORTES in HMS Pandora 1779 in 3D
It has been a long time since the last time I visited this website, check the messages (I am very sorry that I did not check them and reply earlier), or updated the model. A lot of things happened over these years, and I had much less time to indulge myself in my hobby than before.
I made small progress on the model over the years, but still far from completion. As can be seem from the attached pictures, the beakhead and bowsprit are completed, with their standing rigging in place. The 6-pr guns are also placed at their ports.
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2013-03-18 Upper deck bulkheads finished
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2013-03-10&11: waist rails, sheer rails, drift rails, fife rails, plank sheers, cutting the external planking above the main wale into individual pieces
This is the progress up to now. Enjoy!
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2012-06-05: assembling the stern to the hull, adding the rudder chains
2013-02-11: ladders connecting the lower deck to the upper deck, chain pump winches, iron pillars on the upper deck, shot racks on the upper deck
2013-03-04 to 05: forecastle planking and fittings, quarter deck planking and fittings, catheads, stove, capstan, forecastle planksheer
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2012-02-29 to 05-31: working on the stern
-
ppddry got a reaction from Bill Morrison in HMS Pandora 1779 in 3D
2012-02-20 to 25: working on the steering gear
2012-02-25: changed the color scheme
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2012-01-18&19: began to draw the copper sheathing
2012-01-19: cutting the copper sheathing into individual pieces
2012-01-21: copper sheathing completed
2012-01-21: the hull with copper sheathing
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2012-01-11: upper deck planking
2012-01-14: internal planking above the upper deck
2012-01-15: forecastle beams, quarterdeck beams, and knees
2012-01-17: the whole assembly
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2011-12-19: upper deck ledges, riding bitts, gratings, capstan partner
2011-12-24: main jeer bitts, main topsail sheet bitts, lower deck pillars, pump well
2011-12-24&25: the whole assembly
2012-01-05: lower deck cabins
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2011-12-09: internal planking of the Lower Deck, elm tree pumps, chain pumps, upper deck beams, carlings, partners, and upper deck hook
2011-12-09: coamings of the upper deck hatches
2011-12-09: assembling all parts
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2011-12-04: First rendering attempt. The material was too reflective.
-
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2011-09-19: Putting all the parts together.
Midship section
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2011-09-18: The platforms in the hold.
Putting the keel assembly, the planking in the hold, and the platforms together.
-
ppddry got a reaction from KORTES in HMS Pandora 1779 in 3D
2011-09-18: The planking in the hold was also completed.
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2011-09-18: By this date, the lower deck was completed.
-
ppddry got a reaction from KORTES in HMS Pandora 1779 in 3D
2011-06-15: main wale
2011-06-15: shape of the external planking
The frames can be seen by setting the external planking transparent!
2011-06-16: Cutting the bottom planking into individual planks.
2011-06-17: Finished cutting the bottom planking.
2011-06-18: The main wale was also cut into individual pieces.
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2011-05-17: internal planking and external planking
2011-05-20: The space between the internal planking and the external planking was filled to form the shape of the frames.
2011-05-21: the shape of the keel assembly
2011-05-23: cutting the frames
2011-06-12: All frames were completed!
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
2011-02-26: details of the chains and deadeyes
2011-02-28: HALF-BREADTH PLAN added - keel assembly, main half breadth, toptimber half breadth, top side half breadth, half breadth of the rising line, projections of the diagonals
2011-03-02: BODY PLAN added. A set of lines for the inner surface of the frames are also drawn but not shown in this figure.
2011-03-04: water lines, cant frames, fashion piece, hawse pieces, transoms, inner post, apron, keelson, first thick limber strake next the limbers
2011-03-05: deadwood knee, disposition of the frames
2011-03-08: disposition of the square frames
The 3D build began from this point!
-
ppddry got a reaction from JerryTodd in HMS Pandora 1779 in 3D
Let's get started!
2011-02-09: keel, false keel, perpendiculars, cutting down line, lower deck, upper deck, stem post, stern post, stern counters, stern timbers
2011-02-10: toptimber line, top side lines, water lines, forecastle, quarter deck
2011-02-12: lower breadth line, upper breadth line, main wale, sheer rail, waste rail, drift rail, fife rail
2011-02-15: gun ports
2011-02-17: channels, deadeyes
2011-02-18: planking above the load water line, platforms, knee of the head, ladder, fenders, chestree
2011-02-19: lower cheek, upper cheek
2011-02-20: head rails, head timbers, cathead
2011-02-21: taffrail, quarter gallery
2011-02-22: rudder
2011-02-24: gun port lids, sweep ports, scuppers, hammock cranes, swivel guns. The taffrail and the quarter gallery were modified.
-
ppddry got a reaction from Mike Y in HMS Pandora 1779 in 3D
Hi Mark,
Thank you very much to pointing out the inaccuracy! The following picture shows the standard as of now. It seems that I need to modify it further. Also, do you mean the two light blue edges should be rounded near the stem post but remain sharp near their front end?
Best regards,
Jingyang
-
Our Emblem ®
