franzschmidb

hello Roger, thank you for the hint to Flying Fish. That is indeed a very beautiful ship, the lines show a fast sailing vessel, as far as I can see. In the meantime I have acquired a kit of Brig Flirt 1782 made by Vanguard Models. Most likely I will build this well documented little Brig instead of the dubious Jotika kit of schooner "Pickle". All I can say about this: a pickle is always crooked. Maybe I can find a ship modeller that wants to continue building Caldercrafts "Pickle". I have just set up a few of the frames, the rest of the kit is as it came. I do not think I want to fool around with the kit from Jotika anymore. regards Franz

hello Peter, thank you for giving me confidence to build this little schooner. I have looked at your Bellerophone post. Looks great, but very ambitious. I would love to build one of the „wooden walls“, but am afraid it is just too much for me. After scratch building a boxwood plank on frame model of Boudriots La Salamandre which took me nine years I have decided to build only small ships, just for fun. best regards Franz

dear Ollie S, I have read the comments of Jotika. But the question is: which plan of a bermuda schooner did they use? I could not find a schooner with 72 ft in the plans of the Royal Maritime Museum, especially not in 18th century. Franz

thank you, allanyed, thank you Bruce D. for your quick response. I guess I might as well build the little schooner and give it one of the names of the Adonis class. Normally I like the ships of the 18th century, but this kit is made by plans of later schooners, most likely Adonis class, I am afraid. In that case, the inside of the bulwark stanchions and some deck fittings cannot be in red, maybe they should be straw yellow. Sad, but I see no other satisfying solution.

hello flyer, thanks to your build log I have not started with the pickle kit yet. Indeed I am very grateful for your post. I also tried to find out what ship I am about to build. It seems calling it Pickle is quite risky. Please kindly read my comment in the forum of Modelshipworld "Wooden kits - HMS Pickle Caldercraft". It would be of great interest what you think about it. I would be very pleased to hear from you. best regards Franz (from Bavaria)

this is my first posting after long 8 years, I hope I am writing it in the right forum. trying to start building HMS Pickle schooner from Jotika (former Caldercraft), I was quite unsatisfied with the plans they deliver with the kit. They say it was constructed by Admiralty plans. But the archives at Royal Maritime Museum Greenwich seemingly do not have any plans of HMS Pickle, especially not in 18th century. There have been interesting build logs of HMS Pickle in this forum by "flyer", "Blue Ensign". "flyer" has noted the ships size on the kit plans is too short. He suggested Caldercraft used the "Laura 1806" plan. He shows the plan of Laura 1806 from the RMM. But this ship has much sharper lines and only 6 gunports instead of 7 as shown by Caldercraft. The real Pickle must have been about 73 ft long, the model plan shows a deck length of at the most 70 ft. Browsing through all the plans of schooners and cutters of similar sizes shown on the internet site of RMM, I found the plan of "Barbara 1804/6". 12 schooners, the "Adonis Class" were constructed by this plan. Comparing it with the Caldercraft kit plan, it looks very much like that was the plan they used for construction. The similarity was surprising, the gun deck length is around 70 ft. I shall try to enclose the Barbara plan at the end of this post. The quality is quite poor, it must have had some water damage. Contacting Jotika/ Caldercraft with a long letter asking, yes begging them for the source of their plan was fruitless. No reply. Maybe I shall just build it as a "schooner early 19th century", name it Barbara or Lady Hammond or any other name of the Adonis class. Naming it Pickle seems to be too far from reality. I hope somebody can help me with this little problem.