![](https://modelshipworld.com/uploads/monthly_2018_08/119852846_IMG_20180727_1559521.jpg.96c1167af27f118ccc6da9daa4c106f3.jpg)
Fernando E
-
Posts
242 -
Joined
-
Last visited
Reputation Activity
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
I then started to work on the top dead eyes and shrouds
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
This is a simple jig I made to keep the lanyards equal
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
I started to work on some of the main mast shrouds .
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
I then started some work on the bow
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
Trimmed and glued
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
This was the second or third attempt before I decided to proceed . This is before I have glued or trimmed the ratlines
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
Been a while since I worked on ratlines , so I tried some before I went further . Wasn't impressed with this lot so undid it to try again
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
So I started on the rigging of my Beagle . I decided to start from the stern working forwards , as it seemed it would be easier with less to do on the mizzen mast . I attached the shrouds with a simple knot
-
Fernando E reacted to alpayed in Planking Model Ships
Hi Guys.
Here is the revised booklet with Fig 1 included.
Regards
Allan
PLANKING_rD.pdf
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
Also checked everything was parallel to each other before glueing . Looks a pretty site now that one can see it all coming together
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
And now I thought that I could finally attach the BEAGLE....
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
Attached the bowsprit also . Its seemed out of allignment , but I guess it was the angle of the photos
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
the moment of truth. All yards are now attached , no going back . And then the masts . Too late now if I see anything missing....
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
The moment of truth ....... dry fitted all the masts with dry fitted yards into the deck ......and went in search of a white wall to check everything was in alignment.... all the perpendiculars and horizontals
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
I also dry fitted the yards to the mainmast with the same pinning system . Once everything is in alignment it should be easier to glue everything in place.
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
I followed the same process of checking the detail work on the mainmast yards . You will notice that the saddles do look a lot cleaner , as I was a lot more careful with them when varnishing
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
I then dry fitted the yards to the foremast . I used pins to attach to the mast to work out the heights etc . Made the pins out of some of the pins supplied in the kit , just cut the heads off.
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
This is how I checked that I had completed all the detailed ropes and blocks on the fore mast yards before I tried to dry fit them
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
Complete mizzen mast , with completed booms and top yard attached . I attached these first as it seemed simpler than the attachment process of the yards to the fore and main mast
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
Started work on the mizzen mast , and constructed the booms
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
Completed the main mast , dry fitted
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
Started some work on the main mast . Pretty similar to the foremast , so tried not to make smaller errors that cropped up in the construction of the fore mast . These are some of the blocks
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
You will notice that the saddles on the yards look a little "grubby" . I had thought that perhaps the paintbrush that I had used had maybe not been cleaned properly , but after multiple attempts at cleaning , and resorting to a new paint brush the varnish with, I realised that some of the stain tends to come off the wood during the course of varnishing. I did contemplate starting again , but decided to keep these. I will be more careful when I work on the main mast yards.
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
All the foremast yards completed with ropes and blocks .
-
Fernando E reacted to Pete D in HMS Beagle by Pete D - FINISHED - OcCre - 1:60 Scale
Change in plans . Decided to work on the foremast yards . Involves a lot of sanding the yards into shape as well as the saddles .