Harmstronginga
-
Posts
26 -
Joined
-
Last visited
Reputation Activity
-
Harmstronginga got a reaction from Vivian Galad in Corel Venetian Galleon Ship (Galeone Veneto) - kit recommendation
I finally finished the Galeone Veneto by Corel. I made changes to the kit. I used some decking from left over wood, purchased metal gun openings, decorated the bulkheads. The wood used on wood on frame ships is very thick and hard to bend. All in all it has turned out to be one of my favorite models. At the beginning I was ready to throw it out.
-
Harmstronginga got a reaction from Canute in Corel Venetian Galleon Ship (Galeone Veneto) - kit recommendation
I finally finished the Galeone Veneto by Corel. I made changes to the kit. I used some decking from left over wood, purchased metal gun openings, decorated the bulkheads. The wood used on wood on frame ships is very thick and hard to bend. All in all it has turned out to be one of my favorite models. At the beginning I was ready to throw it out.
-
Harmstronginga got a reaction from mtaylor in Corel Venetian Galleon Ship (Galeone Veneto) - kit recommendation
I have built the Nina, Pinta and the Santa Maria and they are excellent models for a modeler with limited experience. Modelexpo has these models are fun to built. If ordered from Model Expo and you break something, these will replace the item at no cost, They are very good to work with on their Model Shipways
-
Harmstronginga reacted to _SalD_ in Corel Venetian Galleon Ship (Galeone Veneto) - kit recommendation
vossiewulf,
That's quite the visualization... pointy wood dowels leaping out of the box and repeatedly stabbing you in the face
I had thought I was ready to try a scratch built model but I think I need to fine tune my skills a bit more before jumping onto that band wagon. Also while building a case for my U.S.S. Syren and really taking some time to look at all the work I had done on her I sort of got bit by the rigging bug again and decided to build another sailing ship. I'm basically looking for a masted sailing ship that's somewhat different than the one I just finished. I'll take a look at the Revenge.
-
Harmstronginga got a reaction from _SalD_ in Corel Venetian Galleon Ship (Galeone Veneto) - kit recommendation
I am in the process of building this kit now. I have completed the hull and attachments. This is a very difficult model because the wood is very hard to bend properly. Also the instructions are very poor and numerous details are incorrect. I have found that the material furnished is insufficient and in some cases poor quality. This is unusual for Corel models I have built in the past. I do not recommend this model.
Also I have used extra wood I had on hand to cover the deck rather than draw lines with ink.
-
Harmstronginga got a reaction from mtaylor in Corel Venetian Galleon Ship (Galeone Veneto) - kit recommendation
I am in the process of building this kit now. I have completed the hull and attachments. This is a very difficult model because the wood is very hard to bend properly. Also the instructions are very poor and numerous details are incorrect. I have found that the material furnished is insufficient and in some cases poor quality. This is unusual for Corel models I have built in the past. I do not recommend this model.
Also I have used extra wood I had on hand to cover the deck rather than draw lines with ink.
-
Harmstronginga got a reaction from Canute in Corel Venetian Galleon Ship (Galeone Veneto) - kit recommendation
I am in the process of building this kit now. I have completed the hull and attachments. This is a very difficult model because the wood is very hard to bend properly. Also the instructions are very poor and numerous details are incorrect. I have found that the material furnished is insufficient and in some cases poor quality. This is unusual for Corel models I have built in the past. I do not recommend this model.
Also I have used extra wood I had on hand to cover the deck rather than draw lines with ink.
-
Harmstronginga got a reaction from dragzz in HMS Victory by dragzz - Corel - scale 1/98
Hi Dragzz
You and I are about the same place on the Victory model. I went a little different route and did the 2x5 planking as I did the planking in the gun port area. It has been difficult to cut out the 2x5 planking at each gun port. Also the 2x5 planking is difficult to bend but I found away. I see you have already installed the metal gun ports with out painting them red as called for in the directions. Do you plan to leave them the metal color?
Keep up the good work as I compare my status with you.
-
Harmstronginga got a reaction from dragzz in HMS Victory by dragzz - Corel - scale 1/98
This morning looking at the model I realized the some of the gun mounts are away from basic supports. I was wondering if when you cut the planking for the gun holes would the necessary support be there. I am thinking that a vertical support might be required around the edge of the opening. The opening is about 10 mm sq plus framing. What do you think?
I value your opinion as you model looks great.
-
Harmstronginga got a reaction from dragzz in HMS Victory by dragzz - Corel - scale 1/98
I have been giving the gunports in the bow considerable thoughy and I think I am going to leave the lids closed. I think it will present both open lids and closed lids tothe model
-
Harmstronginga got a reaction from dragzz in HMS Victory by dragzz - Corel - scale 1/98
I am behind you on your construction and check your pictures with my effort. One of the things I noticed was there is no support under the decks for the installation of the mast. Therefore I installed a block of wood under the deck at each msat location. You might want to see what you think. Keep up the pictures I need them. The location of the gun ports seem to be a quess factor for me. Will just have to scale and hoe for the best. your pictures will help.
-
Harmstronginga got a reaction from dragzz in HMS Victory by dragzz - Corel - scale 1/98
I am going to start construction on the HMS Victory by Corel in January. I am now checking the contents and reading the limited instructions, In your photos, what size wood did you use to hold the keel in place? Also are you going to leave the ship natural or the painted version?
I will be following your effort to construct this beautiful model.
Our Emblem ®
