MikeP Posted May 11, 2015 Share #1 Posted May 11, 2015 Here is my attempt at a build log. I missed the apparently customary box opening pictures but luckily remembered to snap a few pictures as I progressed over the weekend. Laminating the keel and dry fitting the jig. This was really straightforward. Assembling the jig. Everything just about fit out of the box. Only very minor adjustments required. Jig mostly complete. Following the advice in previous build logs, I used the #11 to score the rabbet and bearding lines, then used a curved blade to carve out the bulk of the material. A 1/16" square file was then used to finish the rabbet to a uniform depth and shape. Needs a light sanding and should be ready. Canute, CaptainSteve, probablynot and 1 other 4 Quote Link to comment Share on other sites More sharing options...
probablynot Posted July 21, 2015 Share #2 Posted July 21, 2015 Nice start MikeP. I've just been given the same Bounty Launch kit as yours, and I'll be interested to watch your progress. CaptainSteve 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.