Jump to content

Recommended Posts

Dear friends.

In my university where I work several students and professors have started last year to use the Sketchup for modeling. Right now we are working on several projects to model using this program. One of them will be to model the Frigata Guayas (Ecuadorian Navy). We have already built this model (as a real model) in several scales, but now we are planning to create a 3D model with Sketchup. Please send us your comments if is any with some Sketchup experiences.

Best regards, from the middle of the world,

Fernando Proanio

El+modelo+del+barco+al+fondo+el+original

Link to comment
Share on other sites

Hi Fernando,

 i´m from Riobamba too but i´m living in Munich. My father has talked with you about my Hobby. Edgar Cando is a good friend of mine and he taught me the Ship Model Building  15 years ago. My first Model was the Swift than i built the HMS Bounty, Galeon San Francisco, el San Felipe and the HMS PANDORA. I´m momentanly trying to use the Sketchup Software because i will build my next project " the HMS ENDEAVOUR. Si desea podemos contactarnos en Facebook donde tengo una gran cantidad de fotos de los modelos!.

 

Saludos

 

Luis Maldonado

Link to comment
Share on other sites

Hi Fernando,

 i´m from Riobamba too but i´m living in Munich. My father has talked with you about my Hobby. Edgar Cando is a good friend of mine and he taught me the Ship Model Building  15 years ago. My first Model was the Swift than i built the HMS Bounty, Galeon San Francisco, el San Felipe and the HMS PANDORA. I´m momentanly trying to use the Sketchup Software because i will build my next project " the HMS ENDEAVOUR. Si desea podemos contactarnos en Facebook donde tengo una gran cantidad de fotos de los modelos!.

 

Saludos

 

Luis Maldonado

Greeting dear Luis. I knew about you from your father who is good friend of mine. Both are working in some modeling project. Nice to talk with you. Edgar Cando  was my good modeling student in the Riobamba Club. Saludos y estamos en contacto

Link to comment
Share on other sites

Hi! How do you model the hull's surface? Is there "spline" available in ScethUp?

Hi Dida:

I was using by this time only curves created as components to work in groups. Later on they are separated. But I found some good article about your question in: http://www.ehow.com/print/how_12146663_work-splines-sketchup.html

Regards,  Fernando

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...