The drum-type grinding machin №2

[toly.kol]

Good afternoon misters

решыл to show you extreme the self-made machine tool I will begin with manufacturing process

Did two months of a photo process it should be clear

If there will be questions with pleasure will answer

I am sorry for my English I write through the translator

Anatol

 

[toly.kol]

Small deviation from a theme

I was registered at your forum to watch construction

Bonhomme Richard 1779 CUZ itself I try to do такойже

Simply be the spectator I can it is not necessary to accept participations in forum WRK

Therefore I share that I have that can to whom it is useful

The lyrics came to an end

Continuation

[toly.kol]

Continuation

 

.

[toly.kol]

Continuation

[toly.kol]

The termination

Short characteristics a drum 80х82мм a horizontal table 300х115мм its inclination from 0 degrees to 50градусов

Working zone under a drum 28мм, speed from 0 to 2500 turns in minute, weight 25кг

And for the sake of a trick it is twisted screws, bolts, nuts 131штука, 60 details of +14 bearings + a belt + the motor are soldered, braided together

I am happy

 

For polishing of small details

The size 255х84х18 in a cathedral kind, length a mobile sponge 60мм, a screw course 30мм, apertures 4мм under development

 For polishing the detail fastens between wooden hairpins, hairpins will be shortened (a thick part) in a thickness of a ground detail

All

 

[greg-kam]

I am speechless with the construction and the wonderful result.

Congratulations Anatol.

 

 

Gregory

[Garward]

Hello, Anatoly! 

   

The interesting machine, but quite metal-consuming and difficult in production - is a lot of details without which it is possible to do, using the direct drive, instead of a belt drive with all its shortcomings.

[fabius.b]

Simply fantastic. I'm always amazed by ability of modellers, but Anatoly has a higher-gear. His homemade jigs  are beautiful. Very very good job

Edited April 12, 2013 by fabius.b

[dziadek]

The fundamental set of  tools - . And instrument interested me ostatni already particularly. can you  publish or send jakić drawing with dimensions? 

I greet 

Kacper

[sonicmcdude]

BIG WOW!!!!!!! You are master technician! I like the ideas, the drum disc sander, the micro table top just awesome!!!

[toly.kol]

The basic sizes

Excuse but I not the artist

Anatoly

 

[ianmajor]

Toly,

 

I too am lost for words - Wow says it all.

 

I am most impressed with your postings. I have added you to my list of names that I look out for amongst new posts.

 

Ian M.

[MD11pilot]

I am sooo jealous of the mechanical aptitude of many of the members here. Very impressive Anatol!