Jump to content
Welcome to our new sponsor - Engine DIY. See banner ad on Home page. ×

Recommended Posts

Posted (edited)

I am researching the Sovereign of the Seas (1637), but this question could pertain to many other English and Dutch ships of the same era. Specifically, RC Anderson, in his book "The Rigging of Ships in the Days of the Spritsail Topmast", notes that the knights associated with the fore and main masts were between decks (see pages 76-77 of his book). This implies that the ropes leading to the knights went through a hole in the deck. Is that correct? If not, how did they travel to the knights? If this is correct, then I have several questions:

(1) Are there any "rules of thumb" for how big to make the hole?

(2) Was the hole directly above the knight or somewhere else? If somewhere else, where?

(3) Was the hole covered in any way (such as with a leather flap) to keep water from leaking through it to the lower deck where the knight was?

(4) Was there any protection on the ropes that led to the knight to protect them from abrasion?

 

Thanks so much for your help!

Edited by anaxamander49
Posted

Here are my thoughts on this subject, and I may be wrong, but I think a little common sense may apply.

The reason to have the knight on a lower deck was to have it on the same level as the capstan.

The hole for the halliard should be just large enough or slightly larger than will fit the six parts of the tackle fall plus the top rope so that they run fair to the rams head block on the tye.

The hole should be above the knight otherwise you will have much abrasion and loss of purchase due to friction.

The halliard would be free of any service to allow it to pass readily through the sheeves on the knight and rams head blocks.

 

Regards,

Henry

 

Laissez le bon temps rouler ! 

 

 

Current Build:  Le Soleil Royal

Completed Build Amerigo Vespucci

Posted

I’ve been fascinated with this topic for a while. On the one hand the weather deck must be able to be rendered watertight, all the hatches and openings can be sealed with covers and canvas. But a few bits of running rigging certainly passed through this deck. So I imagine the holes were no larger than necessary while at the same time not so small as to cause chafe. 

  

Quote

 

 Niagara USS Constitution 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...