Brian100 Posted April 18, 2020 #1 Posted April 18, 2020 Hi guys, I've just downloaded all the drawings for Triton as I intend to eventually do all three builds, I thought I would start with the POB as I have done POB kits in the past. So my question is what scale is the centreboard drawing as I need to resize it to 1/48 scale. Many thanks. Brian mtaylor 1
AnobiumPunctatum Posted April 18, 2020 #2 Posted April 18, 2020 Welcom to the Triton shipyards, Brian. As far as I remember have all drawings the same scale: 1/48. So you have only to check, that you print every frame with 100%. For safety you can check the length of the ruler: 240'' = 127mm in 1/48. Jorge Diaz O and mtaylor 2 Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali
Brian100 Posted April 18, 2020 Author #3 Posted April 18, 2020 Hi AnobiumPunctatum, thanks for the reply, the reason I asked is because the bulkheads are at 1/48 but the centreboard is a lot smaller, I think it's about 1/96. Brian mtaylor 1
Recommended Posts