WW1 TBD Decking Posted October 27, 2022 Share #1 Posted October 27, 2022 I am scratch-building a 1/72 scale TBD (HMS Violet) and have come to a problem, namely making the circular wooden gun platforms made from slats, like a wheel, with the gun mounting in the middle. There were 2 of these on Violet - over the Conning Tower and near the quarter deck. They are 47mm diameter Has anyone any nice ideas how to construct these bandstands? My efforts to date are just too crude to pass muster. Any help would be really appreciated!! mtaylor and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
Roger Pellett Posted October 27, 2022 Share #2 Posted October 27, 2022 I don’t know how well equipped your shop is but I would make these from metal- soldered brass. I would start by using K&S brass shapes in order to get consistency. The circles could be made from slices of brass tubing. The solid center could then be filled in with a wood plug, bondo, or some other modeling paste. Simple wooden jigs can be made for alignment. Roger Ian_Grant, mtaylor and Keith Black 3 Quote Link to comment Share on other sites More sharing options...
WW1 TBD Decking Posted October 27, 2022 Author Share #3 Posted October 27, 2022 I did consider brass but I need to keep the top weight down but i think I might try an Keith Black and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
WW1 TBD Decking Posted October 27, 2022 Author Share #4 Posted October 27, 2022 And make a metal jig. Thanks for your reply mtaylor and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.