DonInAZ Posted March 27 #1 Posted March 27 (edited) Well I'm finally getting around to doing another wood ship (boat in this case...lol!) model. I finished my Chesapeake Bay Crabbing Skiff some time ago and as I have stated in other posts, my intention was to work through some of these small Midwest kits as a starting point to obtain the skills necessary to tackle larger modeling projects in the future. So for my second model, I've selected another Skill Level 1 kit. The Chesapeake Bay Flattie. This one will have slightly more rigging and an additional sail from the crabbing skiff. It is my sincere hope that this build will not take anywhere near the 5 years that my first build took. Hopefully with a dedicated model building room and fewer interruptions, this build will be "smooth sailing"! As always, I'm sure I will have many questions and I look forward to engaging the tremendous pool of talented builders on this forum once again. OK, first up is a parts inventory. Stay tunded for that! Edited March 27 by DonInAZ JacquesCousteau 1 Quote Current Build: Chesapeake Bay Flattie by Midwest Products Completed Builds: Chesapeake Bay Crabbing Skiff by Midwest Products
ccoyle Posted March 27 #2 Posted March 27 I also built this kit as my second wood model. You will enjoy it. If you want to take it up a notch, you can get lots of ideas for detailing the basic kit by searching for flatties online. Good luck! Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
Wawona59 Posted October 22 #3 Posted October 22 I built this kit last year as a gift for one of my doctors. I doctored it up (pun intended) by planking the deck and stern with some walnut strip wood I had from a previous project. I used cherry strip wood for the rub rails on the hull. All of the bright work was finished with linseed oil and buffed to a satin sheen. This a fun little kit. Be careful as many of the parts are quite thin. It's easy to sand trough. I think you will enjoy building this kit. She's a blank slate for adding some embellishments to make her your own. JacquesCousteau 1 Quote Wawona 59 John Next Project: Gifts for friends: 18th Century Pinnace, Kayak 17, Kayak 21 Indefinite Hold for the future: 1/96 Flying Fish, Model Shipways Wish list for "Seattle Connection" builds: 1/96 Lumber Schooner Wawona, 1/32 Hydroplane Slo-Mo-Shun IV, 1/96 Arthur Foss tug, 1/64 Duwamish cedar dugout canoe, 1/96 Downeaster "St. Paul" Selected Previous Completed Builds: Revell - 1/96 Thermopylae; Revell - 1/96 Cutty Sark, Revell - 1/96 Constitution, Aurora - Whaling Bark Wanderer, Model Shipways - 1/96 Phantom, AL - 1805 Pilot Boat Swift, Midwest - Chesapeake Bay Flattie, Monitor and Merrimac, Model Trailways - Doctor's Buggy
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.