S.Coleman Posted September 29, 2013 #1 Posted September 29, 2013 I had a look through all the posts in this section but could not find anything on how to apply varnish the best way. I know some brush it on and some spray it on. In between coats do you give the hull a light sand with extra fine sandpaper? Then apply another coat? Just want some advice thanks Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard
slagoon Posted October 4, 2013 #2 Posted October 4, 2013 S.Coleman - YES if you have the ability to spray it then that works. If you don't, using a brush works just fine. Depending on how many coats you wish to do I would sand lightly between each one. I think you'll be good - if in doubt try it on a test piece. ----------------------------------------------------------------------------------------------------- -Sarah Current Build: Krabbenkutter CUX-87 Harriet Lane Fishcutter GO-38 In the Wings: Corel Victory Cross section Completed Build: USS Missouri HMS Bounty's Jolly Boat Peterboro Canoe
wefalck Posted October 4, 2013 #3 Posted October 4, 2013 Rather than emery-paper, I use steelwool in between coats. Beware, however, of the tiny bits of wire that may be left behind in corners and only show up, when you take photographs. You may want to go over the model with a strong magnet to catch these. wefalck wefalck panta rhei - Everything is in flux
S.Coleman Posted October 4, 2013 Author #4 Posted October 4, 2013 Cheers guys. Now I go go back to the model a little wiser, thanks Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now