Kurt Johnson Posted January 14, 2015 #1 Posted January 14, 2015 I have a piece of 3/16 x 20 inch piece of boxwood that's crowned width wise about 1/16 of an inch. I've never had this happen before with this type of wood. I guess it's wasted, unless I thin it down till it's straight. There wouldn't be too much left. If I soak in press under weight any chance it might correct? Member: Ship Model Society of New Jersey
druxey Posted January 15, 2015 #2 Posted January 15, 2015 Wood will move where it wants to. It's unlikely to flatten again, but you can try. mtaylor 1 Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
cwboland Posted January 15, 2015 #3 Posted January 15, 2015 You could always have it ripped down to be used for planking mtaylor and justsayrow 2 Carl Completed builds: AL Bluenose II 1:75 Gallery Amati Hannah SIB 1:300 Gallery Current Build: Bluenose II - SIB - unknown scale
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now