tkay11 Posted February 23, 2015 Share #1 Posted February 23, 2015 In his table of dimensions for 90-ton cutters, Steel gives the dimensions of the heel rope for the bowsprit, and describes the heel rope as follows: the "Heel-rope reeves through a leading block, hooked to an eye-bolt in the bow, then through a sheave-hole in the heel of the bowsprit, and the standing part makes fast to a timber head or eye-bolt, and the leading part is connected to the windlass". I find this a bit hard to follow, as I understand that the heel rope is to haul the bowsprit out. I wonder how the mechanics of this worked. So I would be grateful if any one could point me to drawings, pictures or models that demonstrate how this is rigged. It may also be that the ropes are generally left off whilst not positioning the bowsprit, but I am particularly interested in how the sheave was placed in the heel of the bowsprit. As usual, any advice from the more knowledgeable will be gratefully received! Thanks Tony Brian the extraordinaire 1 Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.