CRI-CRI
-
Posts
1,440 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by CRI-CRI
-
25 % of bulkheads cut (but not glued) :
-
Following skeleton of ship :
-
i have a dictionnary of marine vocabulary of 18th century... but you have to open it for use... Moby Dick's monograph exists also at scale 1/36 = length 2.20 m 😘
-
First frame in position, it will be a fat boy, miraculous, floating line is OK 😘
-
A test of a simulated trailboard shock (not glued) :
-
The two solutions without sinking gammonings : I suppose that the piece 204 don't arrive at height of upper volute (hances and standard knee are different pieces)
-
Today work without gammoning holes (and not glued) :
-
Here I show you a redraw of plan using your recommendation, and water line cheated down 1/8" (around 3-4 mm) : The ropes will be out of water, but with the decorative element hidden by gamonning, without inconvenient, it's not an immortal masterpiece of Art 😋
-
The first rail is almost finished, closer to a work of sculpture than of engraving : Then, like pancakes, turn it, and start again the same work of cook, without burn out 😘
-
I had inform you that I decided to follow my first idea about gammoning of S-Philippe, I cannot follow the sinking ropes... 😘
-
@Hubac's Historian I received a notification of a message titled "test" send by you, but I found any message on site ? What a curious mystery ! 😋
-
I have the "choice" between an historic "probability of truth", and another approach, more "creative" J-C Lemineur wrote to me that my proposition had existed, but later, then it would be an anachronism, that's also your point of view... I shall take a moment of reflection before a definitive decision 😘
-
Yes, it's what you've understood, If you know the kit of USS Conferderacy, it's the model i'm following for improve the S-P gamonning I shall not modify the waterline position, because it's an absolute reference for all the built
-
Don't forget that these holes will be hidden under a furring deck, SP seems to be a little difficult, but nothing really impossible for me... 😘
-
Some end of afternoon small work :
-
These illustrations show little more about this rather difficult question :
-
Possible rectified gammoning's holes simulation :
-
Jean-Claude Lemineur wrote me that verticalised and equidistant frames will be without real visible difference about shape of hull Here, as previewed, pics of a simulation of gammoning :
-
With vertical frames, it's possible to draw floating line as reference, and that's I preview :
-
I try to follow my built with a paper frame of head's knee : I answer J-C Lemineur about a curiosity (I've never saw that before...) : the gammoning's notches sink under the floating line... I shall tell you the response when received
-
Last today work :
-
Following work about the keel :
-
Beginning of curving rabbet, 1 mm deep for 2 mm planking :
-
Moby Dick, chapter one 😋
Our Emblem ®
