![](https://modelshipworld.com/uploads/set_resources_21/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
marktiedens
-
Posts
1,737 -
Joined
-
Last visited
Reputation Activity
-
marktiedens reacted to pirozzi in Royal William by pirozzi - FINISHED - Euromodels - 1/70
Middle gun deck ports cut out and false cannon blocks in place on deck.
Vince P.
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 31
aft deckhouse (command cabin and nav- and Chart-room) and spare aft anchor.
the blue guy had always become too much Porridge as a Baby already and now has to leave the Crew for his size
chest-cover to sit on, for the auilliary rudder mechanics, here still without wheel
some brass pinrails to the deckhouse, and the main rudderstand saddle for the 3 steering wheels, this rudderstand (the wheels) is operated manualy if necessary by up to 6 men
the Long boom outside starboard bulwark is swivible and required for fastening the boats in water (when rigged 90° square to the hull). The brass wire through the top spanner-eyelets is only preliminary and prevents the spanners from tilting down between bulwarks and inboard pinrails
vents and Skylight added on top of the small well-deckhouse
Build log part 32 to follow.....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 30
check for cutter on the boats rack
captain`s pinnace goes besides the cutter
first deck Skylights....
Build log part 31 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 29
decks ready for Fitting out
Stern and bow of hull so far done
checking backstays alignment with regular Cotton thread strings first
set of masts and Yards painted
Build log part 30 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 28
bottom Planks an sitting benches fit well
parts glued together and bulwark rails fitted
a Little bit of painting done and rudder fitted
the ouitcuts for the oars are done
three simular boats completed
the captains pinnace is done in wood
Fittings attached
the figure in the Cockpit is scale 1:87 (a bit too large)
nav lights, bulls eyes and windowframes still missing
Build log part 29 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 27
this wooden form gives the inner space of the boat after removing it
gratings for the boatrack
aft bumpkins mounted
middle bumpkins mounted
produce 3 left and 3 right halves from the two moulds
the deck inner portions are cut out
made sitting Banks from Card templates and stained ply to match the boats interior contours
ready for fit check
Build log part 28 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 25
Need 28 halves of this raft Containment, so ist worth doing a mould.....
the half of the metal model is pressed into schoolkids clay, this being the mould (s)
when making the boats there is always, before it cures off, some Polyester left, so is goes
into the moulds (without wasting it)
sanding, primering, Fitting of the halves, and preliminary mounting (some cradles to be made first)
fastening with brass wire straps
fitted on to the raft Container launching flipboards
a wooden model is made for the three boats of the Gorch Fock. The making of the boats Pictures shall follow later on
Build log part 26 to follow.....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
build log part 24
Preparing for the captains Launch (Pinasse 9,2m )
the Yards have to allow bracing to utmost Position before they touch the backstays
checking alignment through topgallant platform before the final backstays are set
the boats Derrick attached to the mainmast
the mizzenmast bears no yards
have the most masting parts done...
the ventflaps for the scupper openings are attached
my master raft Containment template for moulding the semi halves
BUild log part 25 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
build log part 23
Here the mizzen mast unpainted....
hooters, Radar station
lower platform antenna
top antenna
Mast top
middle gaff boom bearing
set of masts, yards
Build log part 24 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 22
the pinrails are removable for Access to the eyelets (shrouds and backstays fastening)in between
mizzem mast pinrail, the nameplates are aside the poopdeck and at stern
bowsprit netting
swivible bumpkins for bracing tackle rope guides
the tack Position of the Forward mast lower yard
Build log part 23 to follow....
Nils
-
marktiedens reacted to DiKri in Wasa by DiKri - Corel - 1626-1628 1:75
All masts and spars are ready with blocks attached according to the Corel plans.
I placed the masts on the hull just for the photo. The background isn't what it should be, but nice pictures is for later...
Next I experimented a little bit with a Bosch PLL5 laser pen as help in aligning the masts. Seems to be very helpfull...
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
build log part 21
variety of Yards in different completion stages
view skywards
jib boom rigging done
without figurehead
Albatros at its place
side hull bumpkins for bracing tackle
bulwark bolts to be cut and nuts and washers to be painted white
Build log part 22 to follow.....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 20
scetch for Yard / block tackle at mast
preparing for soldering jackstays to the lower yard
on the next model I would`nt do the footrope (horses) holders this way, They would touch the yard tangentialy from the Yard aft side, and be attached to the second jackstay row
checking the Yard swiviling capability
the geometry of the yardracks must allow a Close as possible Position of the leeward yardend to the shrouds when full braced
startig jib boom tackle and safety netting
the solid bobstays are from brass wire
the Albatros figurehead is attached removable
Build log part 21 to follow...
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 19
scetche for rigging mainmast
and for foremast
scetch for Yard (one of many)
impressions for masts and Yards after painting
Build log part 20 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 18
foremast
one of the two main lower Yards with twinjackstays attached
Yard mounted to its place
Stern decoration with nameplate, and hometown badge (Kiel)
Build log part 19 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 17
getting all the eyelets soldered on
stations for hight-fixed and vertical-moveable yards
underside of topgallant platform
masttop and slide rail for royal-yard
underside of lower top platform
Radar Station protection Cage on foremast
fog horn within protection as well
Build log part 18 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 16
roller for Yard hoisting / lowering chain (in mid mast)
bulls eyes inserted
checking mast angles and alignment
Fitting for taking up the chainplate (anchoring for the lower top shrouds)
top spars with access- ladder and devices for antenna and nav light attachments
belaying Points in deck area
Build log part 17 to follow....
Nils
-
marktiedens reacted to Ulises Victoria in Vasa by Ulises Victoria - FINISHED - Corel - Scale 1: 75 - Royal Ship
Hello all!!!
I finished the running rigging in my Fore mast.
Next Main, Mizzen, Flags and done!!!!
Thanks for watching.
As always, comments and critiques welcome!!!
-
marktiedens reacted to NAZGÛL in Wasan 1628 by Nazgul - FINISHED - Billing Boats Vasa 1:75
Here's a small update on the jacks:
Carving the roman soldiers. The real ones are very corroded and little details can be seen, so I went for a design I liked.
/Matti
-
marktiedens reacted to JanV in Wasa 1628 by JanV - Corel - scale 1:75 - Vasa
all figures are mounted
next step will be the finalization and repair of paintwork.
also I hava to make a to-do list for the last items on the decks
- stairs
- doors finalization
- decorations between the doors
- .........
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 15
togallant platforms
Connection to cap and spars (on the two mainmasts)
alignment checks before soldering parts together
the lower top is moved to the correct Position, then secured with a pin to the mast
Mast rail shoe that goes to the appropriate yardrack
set of uncompleted masts and jib boom
some paint touch ups done, now ready for inserting portholes (bulls eyes)
Build log part 16 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 14
Starting to do parts of the masts
plattforms for the lower tops (multifold soldering Piece)
These will be slipped on to the mast and later secured in Position by a pin
handrails at rearside of plattforms
chocolate Brown Color at poop and forecastle upper portions
anchorchain portholes mounted
other porthole openings drilled but no inserts yet
White paint on...
Build log part 15 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 13
Time to get primer and paint started...
dull White resin based primer is brushed on
the rudder has been plated as well, but the prop is too small in diam.
found this one at a web-shop, and modified it a bit, cut off the eye and drill a M3 thread into the hub
figure is 1:87 (H0) scale)
here and the next pics the White Portion is only primered
Build log part 14 to follow....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 12
The ultimate GF 2 actual Version has rivited plates to the frames and also welded plates for horizontal seams. As I do not exactly know to what degree the riviting was in 1958 when launched, I "rivited" the entire models hull. Perhaps someone may now better...
Build log part 13 to follow.....
Nils
-
marktiedens reacted to Mirabell61 in Gorch Fock 2 by Mirabell61 - FINISHED - scale1:95
Build log part 11
the ladder like fields dimensions orientate on the grating (later fitted) measurements
the boatrack supports are screwed done under the same screws as the pinrack rails
welldeckview looking foreward
the functional flip launching boards shall take up the inflatable raft Containers (here closed)
here flipped open, also the Center Support deck to boatrack Support can be seen
here the plating of the hull Begins. The main plating to be seen in the next build log part
Build log part 12 to follow....
Nils