Jump to content
MSW Spring Donation Drive

mhaas2

NRG Member
 View Profile  See their activity

  • Posts

    73

  • Joined

  • Last visited

 Content Type 

Everything posted by mhaas2

  1. mhaas2
    This might be of help, Right time period and really close on scale at 1/240 https://www.whiteensignmodels.com/p/Gold+Medal+Models+1240+USS+OregonOlympia+GMM+24004/3181/#.U_UQc6NuVg8
  2. mhaas2
    This site has some stuff that may help you. They have railings and ladders. http://sklep.gpm.pl/en/modelcard/ships/1/250/uss-maine
  3. mhaas2
    Looking good. I just ran into a problem with mine last night, but from your pictures I think you will be OK when you get to that step. I found that when I installed the bowsprit that my knightheads were to short. An hour, some scrap and some white paint. All better now. Just remember, it is your model, have fun!!!
  4. mhaas2
    Hi Don. Although the painting guide says the deck should be painted, I opted to leave it wood. I use a #2 pencil on the edges of the deck planks and then I scrape them rather than sanding after gluing them down. I have left the wood untreated as I feel that a holystoned deck would have that natual look. I do not claim that that is correct for this type of model, I just like the looks.
  5. mhaas2
    OK, the dredge protecton platforms were no big deal. Now we are off to start shaping the mast, boom and bowsprit.
  6. mhaas2
    OK, so added some scoring to represent the strakes. blackened them, sanded the hoops to a better profile and painted. Stained the barrel, added a bung, handle and tap. Made the base, painted and added some rope to hold the barrel in place. Much better than the turned hunk of wood. Next up is the dredge protective sheathing
  7. mhaas2
    Next up is the water cask. It needs some help; looks like a piece of wood turned into the shape of a water barrel. I'll see what I can do to make it look a bit more interesting.
  8. mhaas2
    Completed bilge pumps!!
  9. mhaas2
    Thanks, Russ. I f'd up a few parts for these, but the trick is parts that fit and clean parts. Just like the tutorials I have read here said!!
  10. mhaas2
    Bilge pumps. Time to put my newly learned silver soldering skills to the test. The parts to make the pumps: spout soldered and the upper cone made and soldered. 1 pump made. I must admit I think these look nice. Both pumps made. A little stain and some white paint and the bilge pumps are done.
  11. mhaas2
    Thanks, now time for a new challenge, this model is best approched as a series of small projects, but I guess that applys to most models.
  12. mhaas2
    OK, all caught up. I finished the caprails and hand rails today. As I have been taking these pictures to show progress to friends and family. I have been taking pictures of completed steps. I will start taking more shots of the processes. Next up are the bilge pumps, deck protectors and water barrel.
  13. mhaas2
    Deck houses complete. After Deck House Forward Deck House WheelHouse Trailboards. Next up is the cap rails and Hand Rails. Time to learn to silver solder.
  14. mhaas2
    Decking complete and bilge pump pipes added. After cabin deatailed. Beds are felt wrapped around a form and glued in place. Main and rear hatches completed.
  15. mhaas2
    Up on the base. A little tricky as the rear pedistal is where I led the lighting wires down. I epoxied a tube from the bottom of the base to the cargo decking and inside the pedistal. That gave me the support I needed as there is no scew in that pedistal. Decking. I used a 10" scale lenght and a standard 4 stagger. You can see the LED wiring here also.
  16. mhaas2
    Thanks. I went on the Library of Congress and found picturs that showed the sheathing. Makes sense as most of there work was done in the winter time.
  17. mhaas2
    Bends, planksheer and log rails. Starting to look like a boat! Ice sheathing. Copper plumbers tape and a ponce wheel. First time I tried to do someyhing like this. Worked out well. Stove. Scratch built and added a fire LED kit from a model railroad. Flickers and look real cool. There will be LED's in the fore and after cabin also. Ahhhh! Color! and the centerboard.
  18. mhaas2
    Deck beams and carlings Whole lot of work that will not be seen, but we know its there! Stem and cutwater Headboards. Boy that was fidley.
  19. mhaas2
    Continuing on with the interior details. Forward and afetr bulkheads. The beginings of the after cabin. Lots of just figure it out stuff hear. I spent lots of time looking at and com paring the views on the drawing to get this in with some semplence of correct. Had to do at least some of the deck beams and carlings to be able to do the bulkheads in the after cabin.
  20. mhaas2
    Deck clamps imstalled Center board structure added the floors and the cargo ceiling.
  21. mhaas2
    The side sheeting has been added, as has the bottom planking. The hull was removed from the mould and sanded. The knight heads, knees and fwd strongback have been added also the batons. Added the ribs and the after strongback, plus sone various details. Most of this will not be seen, but it is good practice.
  22. mhaas2
    I started this model back in April and have decided to share what I have done, so fa,r for coments and constructive remarks. I choose this model because it would allow me to practice some techniques that I wanted to learn before I return to my Charles Morgan. Also my deceased wife and I enjoyed a wonderful afternoon on on of these marvalous little boats before she passed. In particular this model has a lot of what most would call scaratch-building and there will be ample oppertunities for me to practice "ironwork" and silver soldering. Building board with building moulds. Keel assembly with rabbit Transon added and chin logs

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...