Kurt Johnson Posted June 1, 2018 #1 Posted June 1, 2018 I’m having a senior moment, and need a kick start. When you make a tick strip for planking, do you start (or end it) from the depth of the rabbet or the surface of the keel. It should be obvious, but at this particular moment it ain’t. Kurt lmagna 1 Member: Ship Model Society of New Jersey
alde Posted June 1, 2018 #2 Posted June 1, 2018 (edited) I would think the bottom of the rabbit would most accurate. If you go from the surface of the keel you'll come up a bit short. Edited June 1, 2018 by alde lmagna, Canute and mtaylor 3 The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
Kurt Johnson Posted June 1, 2018 Author #3 Posted June 1, 2018 Using a paper guide to determine the length between sheer and keel to help determine plank width. I’ve done a few times but with big chunks of time between doing it. Actually, now that I think about it should be the depth of the rabbet. The first one from the bottom is the garboard. Canute, lmagna and mtaylor 3 Member: Ship Model Society of New Jersey
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now