Attaching the First Hull Plank

[acaron41120]

I'm about ready to attach the first hull plank at main deck level. On my model the main deck curves up slightly at the bow. Should I sand the deck beams slightly to make the deck lay flat and follow the deck line with the plank? I understand that the next plank down from the first plank should be straight. Am I misunderstanding something? Any help appreciated.

[davyboy]

Hi Allen,top of this page,planking tutorials etc. All you wish to know is there. Normally the Wales are fitted first.

 

Dave 

[allanyed]

What Davy said for sure.  There is normally no correlation between the lay of the hull planking and the fore and aft curvature of the deck.  

Allan

 

[acaron41120]

I've printed out the tutorials. I'm sure a full reading and examination of them will help me a lot. Thanks for the reminder.