David Enghauser Posted January 29, 2023 #1 Posted January 29, 2023 This is my first post so please excuse me if I am not doing it correctly. Question about the hole in the bow transom knee. When I glue the knee on the bow it is short of the hole. Is the hole in the knee in addition to the hole already drilled in the bow transom? I glued the knee with the short leg against the transom. Thank for the help. David
SkiBee Posted January 29, 2023 #2 Posted January 29, 2023 David A picture would help clarify your question on the hole, but below is a schematic from the instructions that show the hole. The first thing to do when you have a question is look at a few of the existing build logs on the site. Good luck and hang in there, this is a great boat to learn from especially your mistakes. You'll be the only one to notice your mistakes and fixes. Have FUN. Jim WizardOfOs and druxey 2 Current Projects: Completed Projects: Armed Virginia Sloop - Model Shipways - 1:96 Muscongus Bay Lobster Smack - Model Shipways - 1:24 Phantom New York Pilot Boat - Model Shipways - 1:96 18th Century Long Boat - Model Shipways - 1:48 Norwegian Sailing Pram - Model Shipways - 1:12 Lowell Grand Banks Dory - Model Shipways - 1:24
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now