maltbyguy Posted July 28, 2014 Share #1 Posted July 28, 2014 Hi A bit of a cheat I know but has anyone ever used iron on veneers for the second planking ? They seem reasonably cheap thin and flexible available in all sorts of exotic woods I was thinking of cutting it into plank sized pieces Any thoughts ? Andy Quote Link to comment Share on other sites More sharing options...
AndrewNaylor Posted July 28, 2014 Share #2 Posted July 28, 2014 They work well on Large FLAT surfaces, but compound cures on ships hull I think you might be creating more trouble than you think I have use some on a piece of furniture I made, good but damp is a problem as the glue can break down. Andy Quote Current Build HM Granado CC Past builds HMS Chatham CC, HM Convulsion CC, Duke William German Kit, Fair American LSS, The Wright Flyer MS Link to comment Share on other sites More sharing options...
Kevin Posted July 28, 2014 Share #3 Posted July 28, 2014 I know Doris uses veneer on her card models, is this the same stuff (knowing me the answer will be no) WackoWolf 1 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
amateur Posted July 28, 2014 Share #4 Posted July 28, 2014 I very much doubt whether Doris uses material that has to be ironed on.... I thought she uses self-adhesive materials. Jan Kevin 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.