Search the Community
Showing results for tags 'resolution'.
-
Today I start building a new ship. The ship will be in Admiralty style. Regarding the spar, I haven’t decided yet whether to do it or not. At the moment, I made drawings of the frames and began cutting them out. In total I got 60 frames.
-
This will be my build of the Corel Resolution kit. I was attracted to this kit based on a build I saw at Model Ship Builder This is a Japanese site with many very nice models represented. I favor the natural wood/antique look with my models, so the style of this build serves as inspiration for what I hope to accomplish. I have a rather long winded prologue that follows, so feel free to skip to the actual build description that should show up down there somewhere… There has been some discussion here at MSW about the basis for this kit design. It is pretty much agreed there was no actual ship of this configuration named HMS Resolution. Resolution Solved There are some plans from the National Maritime Museum of a sloop named Ferrett ( 1711 ), a 10-gun single-masted, cutter-rigged Sloop.. We also found some plans drawn by Howard Chapelle, that are clearly based on the NMM plans, embellished somewhat, but matching the basic lines perfectly as far as I can tell. Corel appears to have used those lines, and embellished the ship even further, which I will discuss more as I go along, because I will not be incorporating some of those embellishments in my build. There is more. Chapelle drew another set of lines and wrote: “ Ferrett and Sharke “ ,with more detailed information pictured below. I assume Chapelle had access to some resources I haven’t been able to identify, or he speculated based on convention at the time. There are some plans of “ Shark ( 1732 ) “ from the NMM which say: “ A ketch-rigged 8-gun Sloop. “The lines are very similar to Ferrett, but not a 1 to 1 match. A major, but not the only difference, being two masts, which fits the “ketch “ designation. Corel calls the ship a ‘ cutter ‘ . I wondered what makes a sloop a “ sloop “, and found it was very ambiguous.. I settled on this from Wikipedia. In part: “ A sloop is a sailing boat with a single mast typically meaning one headsail in front of the mast, and one mainsail aft of (behind) the mast.” We also find: “ If the vessel has two or more headsails, the term cutter may be used, especially if the mast is stepped further towards the back of the boat.” On the other hand there are a lot of ships called sloops, that have two or three masts. I’m not uncomfortable with the designation of a cutter because the sail plan seems very similar to other cutters, as well as the notation on the NMM collection article which says :“ Cutter rigged sloop. “ The NMM plans say the length of the gun deck from rabbet to rabbet is 65 feet, while I calculate the scaled length of the Corel model at about 70.. I imagine the other dimensions will not match any better, but not an issue as far as I’m concerned. Chapelle provides some deck details in one of his drawings that differ significantly from what Corel calls for. Since there are no deck details on the NMM drawings of Ferrett, I would lean toward the Chapelle interpretation, but I may mix and match as I go along, and point it out when I deviate from the Corel plans. The two large grates do not look typical to me, and I will have to see what I will do with that deck space. I can’t resist the urge to also note, that in my research, I found a Sterling kit of Ferret on eBay.. It looks like it was probably based on the Chapelle drawings, but the deck plan seems a bit absurd with some sort of ship’s boat athwartship with no capstain or windlass. I have also found two Ferret kits from the Ideal Model Co.. One plastic, and the other wood. They both appear to be based on the Chapelle drawings. Continuing on, here is a brief rundown of the Corel kit contents. If anyone has any questions, I will do my best to provide an answer. The box art.. The framework is well done, but I have some modifications in mind, which I will document later. There is a generous fittings package. Unfortunately, the provided sailcloth is too heavy, and the flag set is un-usable.. I make my own rope, so the provided stuff is of no use to me. There are eight sheets of well drawn plans. The strip wood and dowels appear to be of good quality, but I will have to see what is usable as the build progresses. (To be continued.)
-
Corel kit described as an early 17th Century Cutter. Using 'The Sailing Navy List' this gives us the following possibilities: Cutter 1779-1797, 200 tons, 14 guns, 10 swivels , 70 men, foundered in the North Sea. Possible Brig rig. Another source has this vessel as under command of Lieutenant William Huggett. He was lost with the ship, ship was recorded as missing with all hands. Cutter 1798 14 guns, 10 swivels, 70 men no further information. (seems too similar to above) Cutter 1995-1801, 12 guns, 41 men. Hired ship, cutter, 1807 - 1814, 8 guns. Naval customs cruiser, cutter, Built Cowes 1831 Many of Corel's kits are taken from the Chapman collection. As none of the above could be considered correct to the kit description I thought I might find the answer here. Unfortunately the cutter in Chapman looks nothing like the kit. In fact the kit doesn't even look like a cutter. I.e. quarter badges, stern Gallery, bowsprit rig, beakhead. For me the closest fit I have found is from the book 'Sloop of War' by Ian McLaughlan. I think it is probably a made up vessel of a sloop similar in design and rig to ferret but not a cutter. This seems to be a theme with Corel's and some of the other Italian market kits. overview of the kit was that the materials were of very good quality with a good set of eight large drawings. This will be another short topic with photographs found.
- 10 replies
-
- resolution
- corel
-
(and 1 more)
Tagged with:
-
Hi everyone! I wanted to start a new topic dealing with a few weird kits I've found in my research which sort of look like they've been based on actual plans from some sort of archive yet I can't seem to find any concise evidence that they existed or are just made up by the kit companies. My thoughts are that a lot of these older kits were made by some ship builder decades ago and then sold to the kit companies who over time lost track of what plans they were based on. But I am convinced that for most of these listed some real set of plans existed, possibly for a generic unidentified ship since I have to imagine it being a lot easier to make a model based on a historical plan than just made up in ones head. So this forum is an attempt to try and determine which plans (if any) were used for these models as a basis. First up are two kits by Mantua HMS Sharke and HMS Shine. Sharke looks vaguely like the plan from the national maritime museum and Shine looks sort of like the armed Bermuda sloop yet has two masts.
- 66 replies
-
- resolution
- hunter
-
(and 2 more)
Tagged with:
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.