Search the Community
Showing results for tags 'gaff'.
Found 3 results
-
.thumb.jpg.6fd4c1b78768bb3efd745ab810936005.jpg)
Dear all, this is my second scratch built and I must admit I am reluctant to start a built log after the amazing builds I have seen in the forum. But then again there might be room for a complete amateur! I feel much more attracted by the more modern elegant yachts and sailboats than the ships of the line and 18th century ships. There are too many boats I find stunning but I stumbled on the website of Tad Roberts, where I saw this sailboat which I liked and found interesting. Tad has also released the plans so I decided to give it a go. The design is quite unusual I think, it has plywood bottom with fibreglass sheathing and plank on frame for the sides. The frames are notched to accept the planks and it is designed for rowing as well. I am not sure if I am ready for this but we ll soon (or not too soon) find out. I
-
Part 1: Introduction My fishing smack cross section is finished; a new project is already sprouting. But first my workshop is urgently in need of a deep cleaning and there are also a lot of jobs waiting for me in and around the house of which the priority must be upgraded if I want to preserve the peace in the household. So the start of my new project will have to wait. That does not mean that I will go off-line for a while. While making the fishing smack cross section, I was simultaneously working at another POF model. I didn't want to keep up two logs at the same time, but now the pictures are sorted and the model is well advanced, enough to keep the log running while I am busy with other things. I can continue giving weekly updates retroactively at least until I am ready again to start a new project. My previous building projects were working boats (Ostend shrimper and fishing smack) and a warship (HMS Triton cross section). Now I want to build a pleasure boat. I found my boat in an small handout for making plank-on-frame models that I bought some years ago from 'Nederlandse Vereniging voor Modelbouwers' (http://www.modelbouwers.nl/ ). The handout is an assembly of articles which appeared round 1950 in the Dutch magazine 'De Modelbouwer'. They are written by Jules Van Beylen, former conservator of the Belgian National Maritime Museum in Antwerp. In the handout Jules Van Beylen explains how to build plank on frame models on the basis of four small ship models varying from basic to moderate level. The second model of the handout will be the subject of my project. It is a small gaff sailing sloop with a retractable center board. It is an imaginary boat, a design of Jules Van Beylen just for modeling. I doubt that real examples of it ever have been built. One of my previous builds, a coastal fishing sloop was a simple boat, but it took me almost three years to build it (and it is not yet complete now). This is a much more elementary model, so it will be finished somewhat faster. The plans include two sheet: a general construction plan and a rigging plan and are not included in the handout, they have to be bought separately at the 'Nederlandse Vereniging voor Modelbouwers' (http://www.modelbouwers.nl/). They are laying already some years in a drawer waiting to be used. The model will be built at scale 1/10. It is a 7.50 m long hull, so the length of the model will be 75 cm.
- 209 replies
-
- 10
-
-
Scootish Maid rigging problems - gaff and boom
gthursby posted a topic in Masting, rigging and sails
As I wrote in a post a few days ago I am starting to rig a model of the Scottish Maid using an Artesania kit. I find the rigging instructions confusing to say the least (this is likely to be the first of many!) In the Artesania diagram the rigging for the gaff and boom is very confused. Firstly, I would have thought that the halliards should be attached further along the gaff to give a sensible amount of leverage. Secondly, there doesn't seem to be enough blocks to rig both the gaff and the boom. A diagram that I found in Underhills book shows the boom lift as 2 blocks attached to the tree trestles as shown. Does this seem a sensible arrangement for the Scottish maid? I'm also unclear as to where on the deck these ropes would be anchored. In the kit instructions, after describing planking the hull they say that all the hard work has been done and all you have to do is rig the model as per the diagrams - Ha!
Our Emblem ®
