Check out our new MSW Sponsor Innocraftsman
×
Kevin Kenny
-
Posts
1,464 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Kevin Kenny
-
so waht you are saying is that all the tops of the frames are cut flat and added after. I wondered how i was going to cut holes for each of the timberheads to pass through the rail ( not sure of the correct term) . This makes so much sense. -
At the time i started posting it was very difficult to post quality video , that has since changed but i had already picked a place to host my videos and so am sticking to vimeo.
-
The reason i chose Vimeo over YouTube was the quality. The down side to Vimeo is that ypu will need at leat 2m to view. Sorry about that.
-
Not sure why you cannot see the video as it is on vimeo open to the public. Is there something i can do to help you get access? Best regards Kevin
-
I will give it a try and see how they come out. As always thanks for the feedback. Kevin
-
Hi Greg what do you think about Toni point. See my response to him here. Hi Toni Just saw your post. I was under the impression that all comments were sent directly to me . Either i missed youe email response or i did not get it. Your point is very interesting. In fact as i look at the plan of the Thorn i see a lot of differences. The frame 2,9,14F,11F, there is a light line drawing added after the plan was drawn, suggesting that these frames go all the way to the railing. There ar two missing timber head at the back but again light pensil marks??? At the front section the plan has one addition timber head.. What is your openion about the light line drawings.? Also not sure which frame you felt is shifted. Is it 7Aft and 11 aft? Best regards Kevin
-
Not sure how to post pictures but i have been following the Thorn plan as per Gregs suggestion. The forwar section has one additional timber head while the stern is short two timberheads although you can see some light drawing on the actual print. Maby Greg could comment on this?
-
Hi Greg, Thanks for the feedback. I did have to chisel a few of the heels of the cant frames to get them to fit on the 20" step. The first one was made from oversize stock which resulted in my using a slightly thinner frame for #2 to fit and that was even after reducing the foot on #1. Anyway it works and only you and i will know what i did. The spacer blocks are all different sizes, I suppose that may be because of the different angles at the foot? Although the frames installation was much better. I spent time trying to aline the tops and the jig really helped but i still find it difficult to understand why the variance in height along the length of the frame between some of the frames on either side?The only variable could be the height of the step. In terms of the PDF files, I did get the CDs of the frames but this never works so I am photocopying the plan to make copies. I am not sure how to get the PDF at this stage. I actually purchased all the books plans etc way back in 2008 and only started the build last year. Too much work and not enough time to do what i wanted to do. I do have one question. What is the finish thickness of the frames? I just can't seem to find that anywhere. Must be there somewhere. best regards Kevin
Our Emblem ®
