HOLIDAY DONATION DRIVE - SUPPORT MSW - DO YOUR PART TO KEEP THIS GREAT FORUM GOING! (Only 64 donations so far out of 49,000 members - C'mon guys!)
×
KeithAug
-
Posts
3,966 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by KeithAug
-
Having spent a number of years scratch building HMS Cornwall (Type 22 Frigate) at 1:96 scale I felt I wanted to tackle something a bit quicker and easier. I also wanted a model that provided the opportunity for enhancing the kit to create something a bit different from the norm. After a week or two trawling through the range of kits on offer I decided to build Amati's Endeavour at 1.35 scale. Although the kit features Endeavour in her 1934 guise I decided to model her as restored in 1989. To do this I have relied heavily on the web based photographic resources. The kit was a Christmas present from my kids and when finished my Daughter has claimed the model for her bay window. The building of Endeavour has been covered in detail in a number of build logs and I don't intend going over the ground they have covered so well. What I intend doing is covering some of the things I have done differently and what I learned in the process. I will start where I am now - in the middle of the build and then go back to the start, working through a series of updates over the next couple of months. Hopefully with summer out of the way I will get back to building in September and complete in time to add another kit to my wish list for next Christmas. Here are a few photographs to start the process.
- 85 replies
-
- 12
-
-
Jim Byrnes Model Machines
KeithAug replied to Mahuna's topic in Modeling tools and Workshop Equipment
like a number of you I have been considering options for installing featherboards on my saw. In particular I wanted something to provide horizontal pressure to hold the timber against the fence. I also wanted something which had a degree of self adjustment (to avoid resetting every cut). The attached photos show my solution. The arm is spring loaded (elastic bands) and this allows me to rip over a range of 1/2 inch without resetting. To reset I move the arm to the next hole, this takes about 30 seconds. The mechanical advantage on the arm means that the force holding the timber agains the fence is about 50% greater than the force applied by the elastic band. While the elastic band may appear to be a bit crude it actually works very well and of course has the advantage that the force can be varied by simply adding or removing elastic bands.
- 203 replies
-
- 10
-
-
Jim Byrnes Model Machines
KeithAug replied to Mahuna's topic in Modeling tools and Workshop Equipment
Thank you for the advice - contact successfully established through the PM route. Keith. -
Jim Byrnes Model Machines
KeithAug replied to Mahuna's topic in Modeling tools and Workshop Equipment
Hi Guys - I need some help! I have been attempting to buy a Byrnes table saw using the Byrnes web site and have also tried to contact Model Machines using their web site email page. When I try to use the web site check out I get "Safari can't verify the identity of the website "host2interwebinc.com" and if I try to proceed further I get a 404 error web site not found. Also I have sent 2 emails via the web page but have had no reply. I know Jim uses the NRG site and that lots of you have had contacts with Jim in the past. Can anyone suggest an alternative method of contacting Jim or Model Machines. Regards Keith
Our Emblem ®
