Karkka
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by Karkka
-
-
-
13 hours ago, mtaylor said:
I think the link Karkka posted is from the database. Here's a link to the tutorials. https://modelshipworld.com/forum/98-planking-downloads-and-tutorials-and-videos/
Yes I did, but I had it on my computer.
-
I have glued 3 planks. now the getting a "clink" because of the slight twist to glue them on the frame.
Is this pdf good for every type of planking. I see that the are using paper with
markings. Maybe my planks don't follow the natural curvature that's why the must bend strange.
https://modelshipworldforum.com/resources/Framing_and_Planking/plankingprojectbeginners.pdf
P.11
-
I hope this new pic i better.
I maybe misunderstand you. I thought you mean my pic, but now I understand you mean the pic i the manual. I still keep this post.
I did some line on one of the pic, maybe I´m completely wrong about planking but I have no idea how do put this together.
It´s not like the manual.
-
It´s this kit
https://www.occre.com/model-ship/bounty-boat.html?___store=en&___from_store=en
It says easy kit for beginner.
As far as I can see from the pic 11of the planking it seems like they are going in a straight line and the frame are in the same level.
-
Hi.
I´m trying to complete my build. But I ran into some problems. The bulk frame seems not to be in the same height, I have done after the manual when gluing them. Now when I´m about to start planking the hull I don't know what to do. I understand if it´s not going to look as the picture, but if someone have some idea how to make it look good it would be great.
The manual says I should put one plank 3 mm down on every frame but it´s not going to work. and if I´m going to later put one plank above it´s not going to touch the frame.
I had one idea to maybe saw of a little but i don't know if some frame are to high or to low.
-
Hi.
I´m trying to complete my build. But I ran into some problems. The bulk frame seems not to be in the same height, I have done after the manual when gluing them. Now when I´m about to start planking the hull I dont know what to do. I understand if it´s not going to look as the pitcture, but if someone have some idea how to make it look good it would be great.
The manual says I should put one plank 3 mm down on every frame but it´s not going to work. and if I´m going to later put one plank above it´s not going to touch the frame.
I had one idea to maybe saw of a little but i dont know if some frame are to high or to low.
-
I could use some help, I´m going to sand down before planking, and it´s really difficult to know when it´s enough. I have tried with one of the plank but it´s still not easy to know. I don't want to sand to much and ruin the model. How do you guys do it.
-
-
-
Hi.
I just received my first boat. A Occre bounty boat. Going to start a build thread, to got some tips i hope.
/Robert
- Ryland Craze, ccoyle and JeffT
- 3
Planking, bulkhead not the same height
in Building, Framing, Planking and plating a ships hull and deck
Posted
Garboard plank, Can´t figure out how to do with it. How do I know how long it should be at bow.