-
Posts
52 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by marius
-
Thanks guys . Grant: The problem is that by the time the drawplate reaches S.A. It costs a fortune plus there is a good chance that it will disappear once it reaches our shores. It is so nice to sit in front of my desk looking at the triton and reading all the accolades. I really enjoyed this build. Nice plan.. nice support. I have decide that I like the Triton so much that I am going for the full model. One of the spin offs of this build is that it made me build tools and jigs which I will be able to use for future builds. Got to go and make a big fire now . We have an extremely wet and cold spell here in the western Cape in South Africa. Keeps me out of the workshop. Summer will be wit us soon though. Good luck with your projects . Marius
-
Here it is warts and all but it is mine. I have decided to wait until I get a decent drawplate before doing any further trenailing. I do not like the results using filler.......very uneven Sofar my search for it has not been very successfull. I have learned so much during this build and it has given me a lot of confidence for future builds. Pure enjoyment I will however carry on filling the hold with barrels and rope etc. and will post the results. Thanks to everybody who contributed with advice and encouragement Special thanks to the team who made this project available to us. Very nice and clear drawings and It was free!! That is very much appreciated by people living in countries like mine where the difference in exchange rates make dollar purchases of quality plans impossibly expensive and puts the hobby out of reach for a lot of us. Here are some photos of what she looks like now. Please padon the quality of the fotos
-
Hi Paddy Full of mistakes but I am learning. Used flattened electrical conduit wire for the brackets. Tried silver soldering with a blowpipe but gave it up. Eventually settled for soft solder and soldering iron. Seems to be holding up well. Epoxy did not work with te copper. CA seems to do the job. Thr grating was un uphill battle. I eventually built a mini saw fro a CD Rom case and my Dremel ( Got he idea from Thanasis. After a few teething troubles I got a reasonable grating. Would like the grooves a shade wider but was limited to using 2 dremel blades. The cannon is just fixed temporarily. Getting close to the end of the build now and really enjoyed it. Might just tackle the full build. marius
-
Thank you for the comments gentlemen. Grant Embuya/embuia/imbuia is also called Brazilian walnut. Beautiful dense wood. With sharp tools on the lathe you do not need sandpaper. the bonus is the spicy smell emanating from it when you work the wood. It is a very dark chocolate brown. and was very popular as furniture wood and used in combination with with S. African Yellowwood. Sadly Embuia trees are among the threatened species I know Yarrah. It was used extensively as railway sleepers here. and you can buy the old sleepers as they are being replaced by concrete sleepers or just dug out by the scavenging hordes. Beautiful tables are made from these but unfortunately most of the sleepers have been treated with creosote (preservative) which discolors the wood. (Americans please note I spelled Discolors in American...learning the language LOL) Joss I agree cutting to shape is the most accurate way. I read somewhere on the site about bending a wide plank to shape and only then cut the individual beams from the plank. Rusty I am going to try the fake treenails . Just have to get some dark filler when going to town( Living on a farm) Paddy Had a look at your build today . You are doing a very neat job. You seem to have a lot of patience which I unfortunately lack although I have plenty of time.
-
Thanks for the comment Ron. I envy you the availability of tools etc. but it makes me more innovative and that is part of the hobby. I am sure now that I was too much in a hurry and should have done a longer soaking. I will just have to live with it. Problem is that I have already bent the Gun deck beams the same way. If I try to correct them it will not look right marius
-
Hi Christian, Pete & Paddy Thanks for the comments. Paddy I think my mistake was in soaking the beams in hot water for only 10 mins. Overbending slightly also seems a good idea. Shall soak for at least 1 hour in future. I also forgot to mention that I made the tenoned joints in situ. I personally feel better when I can see where the joint has to go instead of getting nasty surprises later. I have not been able to get Exacto knives here. The local variety of blades I find to flexible fo accurate cutting. Will have to find suitable alternatives. As you can see I have not done any treenailing. Cannot find drawplates for wood among our local merchants. One must remember that the market for specialised hobby tools is very limited in South Africa. Too late for the ceiling planks. But I will experiment with other methods to find a solution.
-
Hi Made some headway the last week. Planking done on the outside. South African Yellowwood. I am leaving the strip on the port side open to show the frame structure. Just wiped some sanding sealer on the planking for Protection. Also started on the framing for the lower deck. South African White Pear for the beams and Japanese Birch for the Carlings and Ledges. Embuia for the wales. All natural colours and resawn from scrap timber. I seem to have lost some camber on the Beams. Maybe my bending method is not suitable for the White Pear.
-
Thanks for the comments guys. The embuia turns very well on the lathe. After sanding I just burnished it very lightly with a stick. I tried at first to do the bending round nails driven into a piece of scrap but they came out with an uneven curve. I took the first ones out of this jig and they look great. marius
-
I have been quit but not totally idle.Had a cataract operation with a bit of a complication but now OK again. Planked the inner Hull up to Lower Deck Clamps. I must have been careless with my measurements when resawing the planks and creeping error made me lose one plank. Otherwise I am not too unhappy with the results. Started on the deck beams and also the cannons just to prevent boredom. Gun barrel turned out of embuia which is a dark and dense wood. Not quite happy with the dimensions of the barrel. will redo.
-
Posting etiquette
marius replied to dvm27's topic in How to use the MSW forum - **NO MODELING CONTENT**
Whenever it is relevant to my log and it is useful info for me or followers of my log you are welcome to post!!!!
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.