cabrapente
-
Posts
582 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by cabrapente
-
find a brass rod, with which I pulleys in under a minute. bigotas term and almost every club.
-
amberjacks pulleys
-
I think I nailed it. I made the mold, vertical cuts, and is marked, the situation of the frames. Also, I have perfect templates to build, with the surplus. some blocks
-
March 2011. I start the pot. I have problems. not the plane has missing lines. in the drawing below, put in orange, which I think is. I tried doing cuadernitas and do not get ... I think it would be easier with a standard tier. mold me crazy.
-
making the mainmast
-
Good. The doctor gave me permission to play sports, and I've stuck a few days in the mountains. but I'm busy again. I smoothed square shaped tip, a brass rod and a nut, the screw is made.. tables lining and Compass
-
looking for a carpenter to buy pear tree, I found a man who has seen the boat, and is committed to giving me the trimmings that go. last week, made clean, and just had this ....... walnut, linden and center lot not remember the name. but assures me that saved me a lot more. I have had a small lottery.
-
side trims, came out very small. I have taken and I have others.
-
anchors start. the first, took off. Now I make a notch, and held even without soldering. I bow before limarla rod. since the first split.
-
stern ornaments
-
good after doing a second door, started the third.
-
hatches start.
-
I changed the scuppers, by termoretractil covers gray to simulate lead. the base of the mast
-
I bought PROXXON grinder. is a very good machine. can be attached leaf cutting table. and I have made a useful, velcro sanding.
-
the cabin. to want to place the reel brake, I see that the front deck, this low, at least half a centimeter ... I got off the sleepers and upload, without starting anything.
-
the foremast and bowsprit .... cool fit very well
Our Emblem ®
