GalliumSphinx

Looking good Hunt, a model in progress is better than a model in the box. I'm currently working on this same kit as my first model and I'm nearing completion. As a newbie I've missed many opportunities to improve upon the model, I'm considering doing a scratch build at a larger scale in the future after finishing a couple more kits I purchased. Use that 3D printer, you're fortunate to have such a versatile tool to create so many extra details and improve the parts in the kit. My build log kind of died out trying to find time for everything between work and school, but your works station is way better than mine and I'm sure your model will be too! looking forward to following along!

There aren't many songs about Alberta so I definitely know Alberta bound, you don't hear it often but most people into country and folk music know it. As this was my first kit and already quite an expense as a university student I've pretty much stuck with what came with the kit. I know from looking at the expedition photos the stanchions (had to lookup what that meant and just got pictures of those things used to make lines at movie theatres and things) and things like the wheel house certainly could be upgraded. I stuck with the PE brass as in my opinion it looks decent although not 100% accurate. They are a hassle to do, I have broken the railings too many times to count at this point, just an unfortunate consequence of the spike that goes into the wood being so short the glue has very little to hold on too. They do hold reasonably well I found if I glue them and put them in, and then add extra super glue around the base with a brush applicator afterwards. Whichever option you choose will look great in the eyes of a casual observer.

I found doing a build log the same as you Tom, too much trouble. As a first time builder doing a log seemed like it wouldn't help anyone else much, as i have no tips or advice or even most of the basic knowledge about the parts of a ship. And I don't have a good camera or any light in my room for photos . Far from giving up, I've been forging ahead and am working on the shrouds of the endurance despite knowing nothing about how a ship is rigged. My desk has on and off been covered in sawdust and glue rather than my university reports. I have to say I have also come to agree with this quote " Now I've learned to appreciate that a ship model (or any other type of model) is a representation, not a dead-nuts accurate depiction." I've learned I either have the time to build my boat or do research, not both, and no one else who hasn't build the endurance themself will know the difference. I would be so lost without Occre's videos when it come to the rigging. Sometimes there are discrepancies between the videos and the paper instructions, right now I'm not sure what to do about the top shrouds, in the video they have deadeyes like on the bottom ones, but not in the paper instructions, but I don't think I have enough deadeyes anyway, so I really only have one option. I appreciate you took the time to comment on an old and probably dead build log. Its nice to be able to engage with a community who understands what goes into building these models, and especially who can empathize with people taking a minute to look at your model and say how patient you are and then move on.

Ever look online, see an ad with a model ship, and inadvertently went down a long rabbit trail and purchased a model kit of your favorite historical ship yet have no modelling experience whatsoever? No? Well, I did it twice... I am now in possession of OcCre's Endurance kit and their new Flying Dutchman model (it scares me not because of its cursed nature, but single planked hull). So this is my build log for the Endurance, which is already under way as I just found this forum a few weeks after starting the model, oops. All things considered I'm pretty sure I've made good progress so far, having laid the deck and done the first layer of planking on the hull. Now, it has come to my attention OcCre does not instruct you how to accurately lay your planks to match how it was done on a real historical vessel, which is something I need to learn before my single planked Flying Dutchman (please help), otherwise I'm not too concerned with the Endurance since it will just be painted. Not sure how much detail to talk about since I am a newb and knows nothing about ships except that they float, being from land locked Alberta Canada 850km away from the nearest ocean with a mountain range in-between. Also, any info on inaccuracies that can be fixed or aspects of the model kit that can be improved upon would be much appreciated.

Hello from Canada My name is Zac. I am brand new to this forum and a little overwhelmed tbh, almost didn’t sign up. I saw people introducing themselves here and thought I’d dip my toe in the water. I’m going to be honest, I have no modelling experience at all, and I just purchased two wood kits from Occre. The Endurance and their just released Flying Dutchman. I’m 20 years old (something to be happy about from what I see from posts discussing how to keep the hobby alive) and picked them up as a project to do in my apartment during school. The reason I chose to get some ship models is I love the history behind them, the endurance especially, I’ve read about Shackleton’s journey many many times. I just read a lengthy post for beginners saying don’t go in over your head. You can take your bets on wether I’m one of those modellers who disappear before their first model is complete, or one of the ones who somehow pulls off a great build (just so you know I’m starting the second hull on the endurance already). my goal is to start a build log, so you can see where my dreams and aspirations come crashing down, just like the endurance. Any help and suggestions on using the forum and making use of its resources would be much appreciated, thanks for taking the time to read this far and maybe respond? Cheers, Zac