sudomekh
-
Posts
63 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by sudomekh
-
-
if you want to show on the model copper plating and mounting boards .... you will not want balsa or foam .... I am not a supporter of these materialslinden, pine or something unsteady OK!
-
Nenad M! photos from here
-
-
Nenad M. .. Try to use a more fine-grained treesExample: pear, hornbeam and so dapee
-
I think Google does not always translate correctly... if I can not write in the forum .... you tell me .... and I will not do soSorry!
-
Sudomekh,
You should start a build log and reference it when wanting to give an example..
Bill.
... I have articles on Russian forums ... model began to build over three years ago .... now I'm working on a ship at sea for 8 months ... I am in Pusan Port now... if you can not do that as I do .... you tell me ... and I'll just read sometimes -
most importantly ... good start ... and then learn good luck!
-
sudomekh I have learned never to trust instructions (especially AL ones) but my skill set at the moment is not high enough to do anymore. don't forget those hand railings are only 2x2 mm wide and sapeli wood which is not good for fine work. maybe in a few years
thanks Robbyn
yes very close I am fighting to urge to go quick and finish her lolpear .... take ... you can do it without problems 0.5x0.5 circular sawimmediately ... you should submit that 2 mm on a scale of 1/100 it is 0.2 mhave you seen ... such railing?no offense ... the appetite will come during the meal))) -
-
... I would at least partially filled em spacewenge think not particularly suitable for the construction of the model (especially small scale) .... I just did the gunwale of his 1/50
- Beef Wellington and trippwj
-
2
-
need for such a tool cutters 150 watts or more
-
Adrieke! I think the small rack of brass for this model ... 1.5 times more than would have been better
-
-
not always trust ... instructions ... see more old photos, drawings from the archives and their artistic taste )))
-
-
Adrieke! Sorry! Everything is fine, but the stairs and railings would like to see more subtle, more elegant
-
may try drilling machine?
-
-
-
B.E. Hi! I fully support)))
-
I did .. MDF frames began to build three years ago ... the spacing of tree filled ... there is nothing dangerous in this material do not see if it is used partially.
- puckotred, NMBROOK, SailorGreg and 1 other
-
4
-
Sudomekh,
Your model looks beautiful and highly detailed. I've also been looking at your photos on the Russian forum. This really is museum quality!
Lou
P.S.
The way you built the hull, in two halves, is very interesting and special!
Thank you!Sorry ... I do not have a workshop and I build the kitchen)))two halves easier to handle)))
-
Dremmel ... think ... not really good for the performance of many works in the construction of our models (for rough drafts Dremmel works good)... and mainly used something smaller
-
Our Emblem ®
Milling Machine
in Modeling tools and Workshop Equipment
Posted
I have ... 70 MF .... but this machine for brass is very weak ... I would like 300 watts