cnemo

Hi KLarsen, nice work,

can you tell me how long the boat is?

What will be your next construction\monograph?

cnemo

On 4/18/2022 at 12:51 AM, Chief Williams said:

Here I am, back after a bout with the bug.  It had all the symptoms of COVID, but the tests kept coming back negative.  I'm about over it now, thank goodness.  I would like this entry to be titled 'What Not To Do When You Aren't Feeling 100%' and the first line of that would be: Don't undertake any planking.

I thought I would be able to get on with the first planking run at least, but as you can see from the attached pictures, I've made a right mess of it.  

 

 

I hold my hands up, if I could start again I would.  My major mistake was that I didn't complete the fairing of the bulkheads before I started to plank.  in a better state of mind, I would have checked the run of the planks before I fitted any of them, and adjusted the fairing to suit,  but in my befuddled state, I just jumped in and started planking with the results as shown.  I'm going to carry on with it and hope I can make it all better when I come to put the second planks on.  Fingers crossed and watch this space.......

Hi Chief, I am following your thread with interest because I would also like to make HMS BELLONA by COREL.
Could you please put some pictures of the bow?
thanks a lot
cnemo

3 hours ago, yvesvidal said:

Overall dimensions (for the hull only) should be 1.25 meter by 0.31 meter.

 

Yves

Hi yvessvidal,

I use a photo of you for my question. Can you tell me how long the keel is?

Hello, I would like to make the HM B Endeavour kit, but I don't know which kit to choose between the Artesina Latina kit and the Caldercraft one.
What do you recommend?
Thanks for the replies

cnemo

Hi Chuck, thanks for your reply.
Please, could you tell me how long is Winchelsea model without bowsprit?

CNEMO

Excuse me Chuck

in my precedent post something has gone wrong.
When do you think to sell the first start kit or plans?

cnemo

I' m also interesting at the books THE FULLY FRAMED MODEL SWAM CLASS SLOOP VOL 1.

if is possible for you could you put some pictures of the fram?

Thanks a lo for your reply

Graziano

Hi Chris, also I would like to buy this monograph
Please, could you put some pictures of the frame to understand how they are drawn?

Graziano

Hi "harlequin",  I' m very happy to hear you.

I too have bought the HMS Bellona kit of COREL.

Soon I will open the yard.

Please, let you put a lot of pictures of everything you do.

I follow with very interest your building.

cnemo

right after several false starts I am again continuing with Bellona.......I will have to strip back several bits of second planking as they have faded to a slightly different colour to the originals.........watch this space..................again. 

Hello Harlequin, welcome back

I also want to do the HMS Bellona of corel

Follow your tred with interest.

please, put many image !!!

cnemo

Hello everyone and welcome to my first scratch build, although i've been planning to build this for a while now this will most likely be a slow build.

First came to me when looking through the russian sites that this seems like a pretty good ship to start on, i plan for loads of detail so there was no point in making it any smaller in scale, inspired by dafi and his hms victory build i'll hope to add figures and all sorts but not too much to over crowd it. I'll also be attempting to add micro LEDS to this build.

The ship will be built mainly with pear and some boxwood with frames of lime. 

Untitled-1.png

So first apologies for the poor quality photos, soon to be fixed. First i start off with the keel using 3mm plywood instead of making it in parts i decided to just make it one whole solid piece which wasn't easy when you're a noob with a scroll saw, which is why i decided to drill wholes to guide the saw.

IMG_0626.JPGIMG_0627.JPG

IMG_0630.JPG

 

Hi AdmiralAntiSpiral,

please, could you tell me how many is long the keel?

Thinks

Hi cnemo

Chucks dimensions are in inch's which I will try and follow. However most of the timber I buy is in mm .so it can be a pain trying to reconcile the two....usually ends up in a fair amount of planing and sanding!

Cheers.....mick

Hi Mick and thanks for your reply.

Also I will use the unit of measurement in mm.

Can you tell me the thickness of the plywood that you used for the keel and the frames?

cnemo

Hi Mick nice start work.

Just a question, are you working in mm or inch unit?

Thanks for your reply.

cnemo

Hi Folks

need your help

I want to register for the website NMS Victory Modellers

for confirmation of registration I have to answer the question:

What was the surname of Nelson's Captain at Trafalgar?

cnemo

Hi Guys,

I have a question for all you.

I would like to do the HMS Bellona.

Is possible to do it using the HMS Vanguard kit of the Victory Model?

If Yes, are there many modification to do?

Thanks in advance for you reply

cnemo

Hi Chrish,

a few days ago I sent you a PM about the clinker planking.

Please, if you have time, could you give me some help / suggestion about it?

Thanks in advance for your help and reply

Graziano

Ollie,

 

Sorry for the late reply, mate, I've been out all day (since 5.30AM actually) and have only just got home.

 

I'll send you a PM in a couple of minutes of an illustration of deck planking.  It's copyright, so can't go here on the open forum.  I'm just waiting for my printer to warm up so I can scan.

 

John

Hi Jim, I have sent you a PM.

Jim is possible to have an electronic copy of the illustration deck planking?

I would like to use it for my Lady Nelson buil.

Thanks

cnemo

Hello to all.
I am, cnemo, a member of this forum and I live in Turin, Italy.
To Turin there is the shop of Amati.
Yesterday I went into the store by Amati and I met Mr Amati.
He confirmed that the Bellona, will be produced in 1/72 scale and will be sold in over a year
 

Hi Chris,

alerts us, here in this forum, if AMATI tells you to start work for the BELLONA?

I am also very interested in the kit BELLONA

cnemo