shark bait
-
Posts
57 -
Joined
-
Last visited
Everything posted by shark bait
-
I ran into a small problem. The # one bulkhead (by the stem) had a measurement of 28 mm on the portside and 26 mm on the starboard side. I found the problem when using a batten to determine how much to bevel. I don't know how it happened, but it is what it is. I used 1X4 mm stock left over from my first build to add material. It was flexible enough to match the contour of the bulkhead. I used two layers of material. So far, so good.
-
Richard, I have very much enjoyed your log. You are doing a fine job and I appreciated your attention to detail. Good work!! Bill
-
Thanks. I looked at the Pickle as well, but my first build was a schooner so I thought I'd branch out a bit.
-
This is my second build. I chose the Badger with the help of my friend Clare Hess and I'm glad I did. I've read all I could find about this ship and ones that are similar. I'm looking forward to the work ahead. I had fun laying the keel and associated bulkheads. I added some mast supports to the side of the keel and the mast slots. That idea came from Ben Lankford's book. The plans called for planking the false deck later, but I thought I could do a better job of it now.
-
Clare, that stack looks great!
-
Hey Clare, The Saginaw is looking great!! I am impressed by your idea of sanding the edges of the planking for more definition and am going to steal that from you. I'm telling you about this one...all the other ideas I've stolen from you shall remain a secret. Bill
-
Well, I finished my work on the Albatros by OcCre. I'm glad I chose that as my first build. I learned a great deal and the kit was forgiving enough to let me correct my mistakes. There were several times when I felt like I built it more than once. I added a few things that were not included with the kit and I added sail just for the experience of doing so. I spray starched the sails and mounted them in such a way as to try and simulate her being at sea. I want to thank all of you who helped me with this project even if I just studied your work. It was a lot of fun. Now on to my next project......the Badger by Caldercraft.
-
Thanks for that information. I can visualize paper sails. I have learned so much working on this model. It's almost like each step of the process from planking to rigging is a separate adventure and then I step back and see the big picture which is the model itself. It's a wonderful process. I appreciate your help.
-
Hi Mark, Thanks for your reply and your help. There is so much information on the link you sent me that I may spend some time checking it out so I am thanking you in advance of reading it all. I have been studying so much in advance of actually building a model and during the build that the fun just keeps on coming! I really like your quote. "Wish I'd said that". Bill
-
Thank you for your reply, Wefalck. I am working on my first build and am adding sails just for the experience of doing so and my wife likes the way it looks on the model. I furled a square sail, but found the jib to be too bulky. Your pictured example is very nice. I'm enclosing two pictures of my work, but please keep in mind that this an amateurish first attempt.
-
Just to satisfy my curiosity, has anyone tried to furl a jib (especially, a flying jib) on a model?
-
Well done, Clare. How many sections to the keel?
-
Clare, It's great to see another post on the Saginaw. I have to say though, that if I ever got my work anywhere near a belt sander all I'd end up with would be a toothpick!!
-
Well, I've got a little further along with this project. I'm still having fun with it, but really want to finish it so I can start another one!!
-
I am working on my first build and don't have a lot of experience, but one thing I got right was not gluing the masts. They were easy to align with the rigging. Bill
-
I struggled with the ratlines until I learned about using a card on this site. It sure does work! I'm now moving on. I've made a lot of mistakes on this, my first, build, but have managed to keep on going and am hopefully learning from those errors. As with most things the builder knows where the mistakes are and the casual observer doesn't. My friends think she looks great. Perhaps you folks will enjoy a couple of glasses of fine California wine before you look too close. Cheers, Bill.
-
Thank you DCIronfist. This is my first build and I am having a lot of fun with it. I'm spending a lot of time doing things over though. Right now I am doing ratlines on the foremast for the third time.
-
Some work on the rigging. The ratlines have been attempted twice. I will continue to try and get it right.
-
The yards for the foremast.
-
I am currently building the Albatros by OcCre. It is a beginner level kit which is great for me as it is my first kit. I found the instructions okay ( with help from the old MSW build logs). The picture instructions were very helpfull and the instructions were translated well. All of the parts were in the kit, but there were no extras. If you drop a deadeye, you better find it. :-)
-
The "old look" is fantastic. Good work.
-
This is my first build. I posted on the old site and will see what happens here.
Our Emblem ®
