BareHook Posted May 1, 2013 Share #1 Posted May 1, 2013 Does anyone have a better idea for drilling treenail holes without drilling through the frame? I will probably use 1/32 dia brass for treenails, but I dont want it to penetrate all the way through the frame. I plan to use a 1/32 diameter drill with a piece of tubing bonded onto it at a set depth of .175 from the drill point. Ken Quote Current Build: Authentic Hannah Kit Bash Pending Continuation: Sea of Galilee Boat Completed Build: MS AVS On Shelf: AL Independence, Blue Jacket Alfred Link to comment Share on other sites More sharing options...
davyboy Posted May 1, 2013 Share #2 Posted May 1, 2013 (edited) Ken,why not just push your drillbit into the pin vice chuck until only .175" protrudes. That´s what I do to control depth,no need to glue tubing on then. Dave Edited May 1, 2013 by davyboy Chuck 1 Quote Link to comment Share on other sites More sharing options...
Garward Posted May 2, 2013 Share #3 Posted May 2, 2013 Ken,why not just push your drillbit into the pin vice chuck until only .175" protrudes. That´s what I do to control depth,no need to glue tubing on then. Dave Good recommendation! Quote Best regards, Garward Is under construction Montanes Ready models Golden Star Corsair San Francisco II Bronze 24-pdr canone Le Fleuron Bronze 24-pdr canone Le Fleuron (second version) Link to comment Share on other sites More sharing options...
BareHook Posted May 2, 2013 Author Share #4 Posted May 2, 2013 Like it too, simplification! Quote Current Build: Authentic Hannah Kit Bash Pending Continuation: Sea of Galilee Boat Completed Build: MS AVS On Shelf: AL Independence, Blue Jacket Alfred Link to comment Share on other sites More sharing options...
Garward Posted May 2, 2013 Share #5 Posted May 2, 2013 The main thing that it works! Quote Best regards, Garward Is under construction Montanes Ready models Golden Star Corsair San Francisco II Bronze 24-pdr canone Le Fleuron Bronze 24-pdr canone Le Fleuron (second version) Link to comment Share on other sites More sharing options...
russ Posted May 2, 2013 Share #6 Posted May 2, 2013 I wrap masking tape around the drill bit to act as a depth stop. Russ Quote T'aint a hobby if you hurry Completed projects Cross section model by Russ 1/48 scale Biloxi schooner model restoration 1/24 scale Biloxi oyster skiff 1/24 scale Biloxi schooner 1/48 scale POB Current project Biloxi lugger Captain Roy 1/48 scale POB Link to comment Share on other sites More sharing options...
Garward Posted May 6, 2013 Share #7 Posted May 6, 2013 I wrap masking tape around the drill bit to act as a depth stop. Russ Simply, quickly and effectively! Quote Best regards, Garward Is under construction Montanes Ready models Golden Star Corsair San Francisco II Bronze 24-pdr canone Le Fleuron Bronze 24-pdr canone Le Fleuron (second version) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.