John cushion Posted February 26, 2019 Share #1 Posted February 26, 2019 I am at the stage were I will be starting to prepare the bulkheads on my pob constitution. Would appreciate any helpful ideas on best way to do this. Thanks in advance. JC Quote Link to comment Share on other sites More sharing options...
petervisser Posted February 26, 2019 Share #2 Posted February 26, 2019 Hi John, What I like to use is a sanding block to bevel the edges of the bulkheads. I take on two frames at a time and sand in both directions. Check the bevel at each frame with a short length of plank that covers 3 or 4 bulkheads and make sure the plank makes complete contact with the edges of the bulkheads. The sanding block I use is made by Xacto. I love it and have used it for many years for all kinds of sanding work. I use 80 or 100 grit sandpaper for this particular job. A dust mask is also a good idea... Good luck. I hope this helped. Peter BLACK VIKING, barkeater, peveka and 1 other 4 Quote Build Log: Billing - Cutty Sark In The Gallery: HMS Unicorn, HMAV Bounty, L'Etoile, Marie Jeanne, Lilla Dan, Zeeschouw "Irene" A Toast: To a wind that blows, A ship that goes, And the lass that loved a sailor! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.