Le Mirage by Popkov Sergey Fedorovich (Russia) - Corel

[PSF]

made a mistake, put away a lot of  area balcony:

the perimeter of the balcony <> perimeter railing

 

way to fix on the photo

[PSF]

installation of railing

 

[PSF]

Two evenings cooking  the end mills. Turned out one of the three necessary.

 

The end mills produced relief strips rubbing strake

Edited May 16, 2013 by PSF

[PSF]

Continued production of the end mill

 

 

strips  rubbing strake from blackened hornbeam

 

 

[PSF]

set improved  decoration 

 

Edited May 16, 2013 by PSF

[PSF]

Test window upper balcony

[PSF]

The crossbar window is made of yellow wood. Glass from plastic from a floppy disk. The  transom stern of blackened wood - hornbeam

[PSF]

window from Kit

 

 

improved window

then will be painted in gold paint

[PSF]

установлены перила верхнего балкона

[PSF]

set the upper balcony railing

[PSF]

windows are painted and installed

window frames are made ​​of yellow wood

[Salty Sea Dog]

Hi Sergey!

 

I just came across your build. Wonderful work on the details!

 

When you improved the windows, is it difficult to not break off the little carvings?

[PSF]

...bulkhead

[PSF]

trial version of the  gun carriage 

[PSF]

Hi Sergey!

 

I just came across your build. Wonderful work on the details!

 

When you improved the windows, is it difficult to not break off the little carvings?

 

Certainly hard!

With the help of Bor-machine  (see photo)  and burs for jewelers

Of course, in one place of  part broken. I glued it on the glue is already in place

but if done carefully and cautiously, then happen without failure

[PSF]

installation hobnail into the side of the ship

hobnail from brass wire

 

1. marking zones position for  a hobnail from brass wire

 

2.made the tool  installation for  the  hobnail from brass wire

 

3. To complete the installation the  hobnail from brass wire has spent 2 weeks 3 hours per day

[Anja]

Hello Sergey,

 

Welcome back.

 

That is some progress you've made. Beautiful work.

I must admit, seeing your Le Mirage hanging in the doorway, was a bit scary.

 

Anja

[Sjors]

Hi Sergey,

 

That's a lot of work but looks great !

And I'm with Anja…scary thing the Mirage hanging at the door…...

 

[PSF]

As always, the first test, and then ...

 

The following photos are only the test

 

These parts are not installed on the adhesive

[PSF]

It's time sets the anchors. This requires the marine rope. So I need to install on mechanism of winding marine rope (а) electric motor

Here's what happened:

[PSF]

Installed a permanent lower and upper cheek (see Figure) from Yellow wood = Amaryl

[PSF]

continue to work ...

[PSF]

set bow hawsepipe and marine ropes for ship anchor

[PSF]

The third attempt to make trunnions

[PSF]

And now I make attempt  a ferreous  parts (studs) on the gun carriage

The device for the manufacture of nails with round and pyramid-shaped hats. Made by a master from  Ukraine (http://forum.modelsworld.ru/topic9552.html).

Edited September 12, 2013 by PSF

[PSF]

Preparation for the production of the cheeks. Material pink pear.

[PSF]

Shoulder milling.

[PSF]

Continued milling.

[PSF]

Workpiece cheeks  laft are ready for further processing

[PSF]

conductor of the holes in the cheeks