Jump to content

Rigging a capstan


Go to solution Solved by Dziadeczek,

Recommended Posts

  • Solution

Why did you enclose plans for the USS Constitution?

This link   Ship Model Laboratory - Centre for Maritime Archaeology and Conservation - Texas A&M University (tamu.edu)  explain the whole process well, and even though it doesn't apply to the Wappen von Hamburg, but the principle is the same.

Link to comment
Share on other sites

Happy New Year Edward,

Can you tell us which Wappen von Hamburg is this supposed to be as there were four from the 17th and 18th centuries, 1669, 1686, 1722, and 1740?    The information on the site given at Texas A&M is probably inappropriate depending on which one you are building as messengers and nippers were not used until about 1740.  (Harland Capstans and Windlasses p.66 and Lavery Arming and Fitting English Ships of War p. 47)

Cheers

Allan

 

PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series.   Click on http://trafalgar.tv   There is no cost other than the 30 seconds of your time.  THANK YOU

 

Link to comment
Share on other sites

21 hours ago, allanyed said:

Happy New Year Edward,

Can you tell us which Wappen von Hamburg is this supposed to be as there were four from the 17th and 18th centuries, 1669, 1686, 1722, and 1740?    The information on the site given at Texas A&M is probably inappropriate depending on which one you are building as messengers and nippers were not used until about 1740.  (Harland Capstans and Windlasses p.66 and Lavery Arming and Fitting English Ships of War p. 47)

Cheers

Allan

 

It's Corel's Wappen von Hamburg I 1667.

Link to comment
Share on other sites

Edward

There were changes to the capstans themselves at the time of your ship.  I have no contemporary information on German ships, but about 1670 the forward capstans on British two deckers  (from Deane's  Doctrine 1670) had a single head capstan on the lower gun deck aft of the main mast and a double capstan near midships with one on the lower gun deck without a trundle head for bars and one on the upper gun deck that did have a drum head and openings for bars, quite different than what the kit drawing shows.   I am not sure if a viol line (something of a predecessor to the messenger) was used at that time or if ships of your size had the hawser go directly around the lower deck capstan.  Hopefully some members here have contemporary information on the proper rigging of the lines themselves.

Allan

  

Edited by allanyed

PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series.   Click on http://trafalgar.tv   There is no cost other than the 30 seconds of your time.  THANK YOU

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...