Jump to content

Recommended Posts

Posted

Hi All, 

 

About to start the Syren Speedwell build. I have received the chapter 1 and 2 parts and have gone through them all - the quality is great. As this is my very first ship build I will be taking it fairly slowly and will be learning from the other excellent builds on this forum. Any tips and suggestions would be greatly appreciated ! 

 

I have already assembled the build board from 25mm thick MDF and have glued x2 50x25mm strips to the underside of the board lengthways, along with a series of smaller strips across the width between the 2 long pieces. Hopefully this ensures the board does not warp. The plan I have had printed and have secured to the board using 3M mount spray aligning using a centre line on the board as reference. 

 

89E6123A-7C54-4195-BE88-2A184C70699A.thumb.jpeg.5e0d4dc0ad5d964d621d2e796126df9f.jpeg

 

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...