Suction adapter for the Proxxon DH40 for download

[Oliver1973]

I've created a suction adapter for the Proxxon DH40.
It can be downloaded from my website and printed out yourself. The diameters have been increased by 0.2 mm so that the tube can be fitted without any problems.

 

https://www.olivers-historic-shipyard.com/

[Mike Y]

Thanks a lot, Oliver!

Printed it and can confirm that it works great, even better than expected! I could not find any chips escaping the suction, let allone any fine dust 😊 and no weird noises, the air flows straight and the adapter is very very quiet, you can feel the whole system breathing properly.

I increased the dust port height to fit the rubber Proxxon adapter a bit better. Otherwise no modifications were required. Nevermind the rough look when printed with a large nozzle, some construction fairing putty

on the inside help with a smooth airflow.

 

Thanks for sharing it with the community!