Mistake on Sternpost Planking

[mrcc]

On my Mamoli Friesland build, I should have left the sternpost bare for vertical planking but realized late of my error.
 

Question is pull it off to the sternpost line or leave as is as I was going to paint the waterline and below all white (which will cover the error)?

 

 

[Knocklouder]

Julian this is one of those questions that only you can answer  🤔.  If it hidden then if we don't tell anyone  no one know lol. If it is going to haunt you  replace the offending peices lol. I would just paint, but that's just me

 Good luck on your choice.  

Bob  M.

Edited Wednesday at 03:45 PM by Knocklouder
Typos

[mrcc]

Thanks Bob...

 

Even if painting, sometimes you can see trace planking outlines and if painted, still need to tie into the stern post above the waterline...

[tmj]

Maybe you can cut off both the stern post and the planking with one clean cut, then cheat by adding a slightly wider stern post for the lower planks to butt up against? 

[mrcc]

Thanks TMJ...  good advice and I may end up doing that but I think I will first try and delicately cut back those flared planks with a razor blade and fine chisel.

[mrcc]

Thanks TMJ for your advice… yes I used PVA glue on the planks and I will take your advice of heating the planks after scoring a line where the stern post should be, and then trying to lift off the ends.

 

PS strange that I received your advice via email but yet your reply/post will not show on the MSW web log - even after, what 10 hours. 

[tmj]

5 hours ago, mrcc said:

PS strange that I received your advice via email but yet your reply/post will not show on the MSW web log - even after, what 10 hours. 

 Hmm... It's gone! There 'used' to be a post about that here, really, there 'WAS'! 😕 

[mrcc]

I know… strange!