NavyShooter Posted January 26 Author #61 Posted January 26 Going to have a boat bay as well... Canute 1 Brad/NavyShooter Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Puncher by NavyShooter - 3D Print - 1/144 Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
NavyShooter Posted January 27 Author #62 Posted January 27 Test print of the superstructure is done - next (full size - 1/144) version will have the mission bay included. yvesvidal and Canute 2 Brad/NavyShooter Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Puncher by NavyShooter - 3D Print - 1/144 Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
NavyShooter Posted Saturday at 12:44 AM Author #63 Posted Saturday at 12:44 AM Got busy with other things this week....some hiccups getting the new printer sorted out too. VERY happy with the Bambu H2S so far. That said, some parts and bits have shown up in the mail this week - VLS rocket pack quick connectors, prop shafts, and my Keith Bender 5 bladed modern props. 2mm thread, 28mm outside diameter. VERY pleased with them. The hull should be finished printing tomorrow afternoon. Of note, the Bambu is about 2-3 times faster than the Prusa. Plus a heated chamber. Amazing. FreekS and Canute 2 Brad/NavyShooter Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Puncher by NavyShooter - 3D Print - 1/144 Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
NavyShooter Posted Saturday at 11:09 PM Author #64 Posted Saturday at 11:09 PM Here's how she looks on the Bambu...hull is almost done printing. I'll be printing the rest of the superstructure over the coming days. Canute 1 Brad/NavyShooter Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Puncher by NavyShooter - 3D Print - 1/144 Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
NavyShooter Posted yesterday at 04:35 PM Author #65 Posted yesterday at 04:35 PM The props certainly look the part. And I've got the 4 main hull modules assembled as of this morning, with 2 of the 4 superstructure modules printed and ready to go. I've got another project on the printers tonight, so the rest of the superstructure will be delayed by a day or so...not a big deal. The new print files are looking pretty good - some minor adjustments needed for fit, and they will still need a lot of sanding to smooth out the facets, but I'm generally pleased with how things look so far. Canute and FreekS 2 Brad/NavyShooter Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Puncher by NavyShooter - 3D Print - 1/144 Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
yvesvidal Posted yesterday at 05:32 PM #66 Posted yesterday at 05:32 PM 55 minutes ago, NavyShooter said: Where do you find that putty? Is that the putty used by Car Body Shops? I have been trying to find some pink/reddish putty that does not need to be mixed with a catalyzer or hardener, without success. I am using the Tamiya putty, but it becomes expensive when you need a lot. Yves
NavyShooter Posted yesterday at 06:42 PM Author #67 Posted yesterday at 06:42 PM 1 hour ago, yvesvidal said: Where do you find that putty? Is that the putty used by Car Body Shops? I have been trying to find some pink/reddish putty that does not need to be mixed with a catalyzer or hardener, without success. I am using the Tamiya putty, but it becomes expensive when you need a lot. Yves Yves, It's standard Bondo red auto body putty. 3M Bondo Glazing and Spot Putty, 4.5 oz, Fills Pinholes, Scratches, Minor Dings & Hairline Cracks, Can Be Used on Metal, Fiberglass, Wood and more, Fast Drying, Sandable in 30 Minutes (907C) : Amazon.ca: Tools & Home Improvement yvesvidal 1 Brad/NavyShooter Build Log: HMCS Bonaventure- 1/96 - A Fitting Out Completed Build: HMS Puncher by NavyShooter - 3D Print - 1/144 Completed Build: HMS Blackpool - 1/144 3D Print RC Completed Build: RMS Titanic - 1/100 - 3D Print - Pond Float display Completed Build: HMCS St Thomas - 1/48 - 3D printed Bens Worx Completed Build: 3D Printed Liberty Ship - 1/96 - RC A slightly grumpy, not quite retired ex-RCN Chief....hanging my hat (or helmet now...) in the Halifax NS area.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now