Half Hull Planking Kit

[DGraley]

On the kit I recently purchased, frame 4a sits .25" higher than frame 4, and higher than frame 5, which makes no sense.  Is this an error in the kit?  I can certainly trim it, but just want to be sure I'm not missing something.

[palmerit]

I built it but don’t remember the details. I’d recommend checking other build logs and see if someone commented or there’s a photo. I remember having to adjust some things, confirming with other build logs, but I can’t remember if this was a step I had to adjust. I definitely had to do a lot of sanding to fair this half hull - a lot more than any other model I built, which was actually a useful learning experience on getting a hull shaped just right (and in the end my version was not quite right). 

Edited Wednesday at 02:22 AM by palmerit

[DGraley]

Thanks.  I figured it out.  There are discrepancies between the instructions and pics.  But it is proving to be a great learning experience.

[LoydB]

11 hours ago, DGraley said:

Thanks.  I figured it out.  There are discrepancies between the instructions and pics.  But it is proving to be a great learning experience.

 

This is my next kit, where are you seeing problems? Thanks.

 

 

[tlevine]

You mentioned the same issue in another thread.  It was suggested that you post pictures of your problem.  If you think there is a discrepancy, please post pictures so that it can be addressed.  Better yet, start a build log.