Jump to content

rcmdrvr

NRG Member
  • Posts

    396
  • Joined

  • Last visited

Reputation Activity

  1. Like
    rcmdrvr reacted to Mike Collier in CSS HL Hunley by Mike Collier - FINISHED - MikroMir - 1/35 - PLASTIC   
    Just the kit of the CSS H.L. Hunley.

  2. Like
    rcmdrvr got a reaction from Keith Black in Question - Where to post?   
    I have just completed a plastic model that I have mounted in a seascape.  I have photos of this completed model that I would like to post to get some suggestions from readers of the forum.  It is not a build log but I want to ask questions, especially about my finishing and the seascape.
     
    Where should I put this?
  3. Like
    rcmdrvr got a reaction from robert952 in Question - Where to post?   
    I have just completed a plastic model that I have mounted in a seascape.  I have photos of this completed model that I would like to post to get some suggestions from readers of the forum.  It is not a build log but I want to ask questions, especially about my finishing and the seascape.
     
    Where should I put this?
  4. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    All the segments of the catwalk have now received the supports.

     
    Wishing everyone lots of modeling fun.
  5. Like
    rcmdrvr got a reaction from Canute in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Just found your build which I will follow.  I have moved over to the "dark side" and started a couple of plastic ship models.  Not as complicated as your Mikasa but still full of very tiny parts.  I am interested in waterline presentations which I think shows off the model in a more "active" setting.  Hope to learn more about plastic ship building by following your build.
  6. Like
    rcmdrvr got a reaction from Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Just found your build which I will follow.  I have moved over to the "dark side" and started a couple of plastic ship models.  Not as complicated as your Mikasa but still full of very tiny parts.  I am interested in waterline presentations which I think shows off the model in a more "active" setting.  Hope to learn more about plastic ship building by following your build.
  7. Like
    rcmdrvr got a reaction from mtaylor in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Just found your build which I will follow.  I have moved over to the "dark side" and started a couple of plastic ship models.  Not as complicated as your Mikasa but still full of very tiny parts.  I am interested in waterline presentations which I think shows off the model in a more "active" setting.  Hope to learn more about plastic ship building by following your build.
  8. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Next I bent and glued on the shutters for the 2 outer casemates. (both sides)
     

     
    Wishing everyone lots of modellingfun.
  9. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Next I bent and glued on the shutters for the 3 central casemates.
     

     
    Wishing everyone lots of modellingfun.
  10. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Next I bent and glued on the shutters for the front and stern casemates with SloZAP and the hand holds wit a dash of PVA-glue.

     
    Wishing everyone lots of modellingfun.
  11. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    I testfitted the 6" and 3" guns in the casemates of the hull.
    I had to enlarge the pivoting holes in the 6" guns slightly to alowe the pins to go in smoothly, as I am a bit reluctant to hammer them in when the hull is laden with PE.
    The Pontos 3" guns don't fit under the roofs of the casemates, as the bottom plates I installed dont alowe for sliding them in sideways, so I removed the roofs, planning to top the area later with a piece of styrene.

     
    Wishing everyone lots of modellingfun.
     
  12. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Some more hull details added, the first with diluted PVA-glue, the doors themselves witg a touch of SloZAP.
     

     
    Wishing everyone lots of modellingfun.
  13. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Next are the 47 mm guns:

     
    First I soldered the pedestalls (Brass 07B and Brass 08B) to the botom plates (781), and bent the platforms (149) into shape

     
    Then I soldered the pre-bent brackets (782) to the pedestalls and the barrels (Brass 07A and Brass 08A) to the pre-bent breeches (783).

     
    Finaly I soldered the guns to the pedestall brackets and glued the guns with the small pedestalls to the platforms.

     
    Lots of Modelling fun
     
  14. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Mass production of the 3" guns, 1 down 15 to go.
    Here are some pictures of the different steps.
     
    Pedestalls soldered to the bottom plate and brass parts bent to form boxes

     
    Brass parts soldered to the pedestall

     
    Preparations for installing the recoilcylinders

     
    Brass plates bent over the barrels and installed onto the bracket (all soldered), and finaly glued the little box to the side of the barrel with a little CA-glue.
     

     
    Happy modelling,
     
  15. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Time to have a go at a first 3" gun A
    The composing elements on the left                                                     -                                    The pieces, bent where nece"ssary

     
    And the result of 3 hours of modellingfun !

     
    Next picture shows the "briliant" Pontosinstructions, and the endresult in the black oval.

     
    Happy modelling,
     
                 
  16. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    I made to fit a styrene plate and glued it under the kasemates openings at stern and stem in order to prevent these guns from falling in the hull.
    A 2 mm-hole in the styrene should help lodgeing the base of the guns.

    happy modelling,
  17. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Next is collecting all the brass parts to make the 3" huns and the 47 mm guns, which replace the Merit parts entirely.
     

     
    Lots of modellingfun 
  18. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    The 6" guns in Merit step 3 are entirely replaced by Pontos brass.
    They are soldered together, no glue used at all.

     
    Happy modelling,
     
     
  19. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Before putting on lots of photo-etch around the casemates, I want to be sure the guns and the hatches around them will fit.  So I started the construction of the guns.
    I started collecting, preparing an assembling the parts for step 2: the 6" guns.
    The different stages of completion, seen from left to right.

     
    The completed guns.

     
    Happy modelling,
     
  20. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    I put the propellershaft and their struts together.
     

     
    Next I adapted them to receive the Pontos propellers and mounted them on the hull.  I also worked a bit on a propellerblade to see if I could ameliorate it.
     


     
    Both shafts adapted and mounted on the hull with Tamiya extra thin cemlent.

     
    Happy modelling,
     
     
  21. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    In order not to damage the portholes I first placed the bilgekeels, taping them down and gluing with extra thin cement. After removing the tape I glued the remaining places.
     

     

     
    Happy modelling,
  22. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    I put on the porthole etch with the bars ar the stem, before and under the achorplates, and at the back, o,ly the last 3 portholes on the bottom row.
    I aplied slightly dekuted PVA-glue around the hole in the hull with a toothpick, then positioned the photo etch over the hole and with a pointy tool I adjusted the position of it. Any excess glue was removed with a damp brush, but I hardly ever had to do so.

     
    Wishing everyone lots of modellingfun,
  23. Like
    rcmdrvr reacted to Herby63 in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Next I put in the vertical ribl, 2 struts and 20 D-links.
     

    Can you find them all? 
  24. Like
    rcmdrvr reacted to yvesvidal in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    Are you going for the "grey plastic/shiny brass" version or will you paint it later on?
     
    Yves
  25. Like
    rcmdrvr reacted to ccoyle in IJN Mikasa by Herby63 - Merit International with Pontos set - 1/200 - PLASTIC   
    I believe "grab irons" is the term you're searching for.
×
×
  • Create New...