Jump to content
New Publication - Ship Modeler's Handbook - They're back in stock! Thank you for your patience. ×

Spaceman Spiff

Members
 View Profile  See their activity

  • Posts

    199

  • Joined

  • Last visited

 Content Type 

Everything posted by Spaceman Spiff

  1. Spaceman Spiff
    Thank you! The plastic rod I was going to use is a bit thick, however I have a bit smaller gauge brass rod or maybe even a hypodermic needle I can use in its place. I may not have to carve it out but build around it as in the pic. That’s the USS Guam in your last pic, but the masts look the same. Here is something I found a bit interesting in studying the photos last night - the deck markings appear to be different in Dad’s cruise book vs other period pics. It appears that the “11” has a black shadow effect and also there is only one dashed white line on the left side of the deck. While the markings may be hidden by the people in the ceremony, it certainly looks different. Are my eyes deceiving me?
  2. Spaceman Spiff
    Not much accomplished tonight. I did put the white down, although I may need another coat. Doesn’t look as good in the pic. After that dries for a day or two, I’ll mask the markings and numbers. Then I’ll start with the basing colors before painting. As you can tell from a previous pic of the ship with all the people, there flight deck is heavily weathered and definitely not one uniform color. That pic was taken off the coast of Vietnam, 1970. That’s what I’m going to try to go for. BTW, painting is my favorite part of modeling.
  3. Spaceman Spiff
    Yep, that’s my plan. Here is the whatever that thing is, zoomed in. Shouldn’t be too difficult. Appears to hull grey with some soot staining at top. Lookimg at the flight deck, is that a thin white border around the deck? If so, that’s an easy thing but just some tedious masking. The white lines and “11” will all be painted, with the exception of the 1 -7 which I’ll use the kit decals. I’ll paint the deck a very dark grey but will use the black basing method and then mixtures for tonal differences. That’s a trick I learned with my planes.
  4. Spaceman Spiff
    Zero 😂 i have some plastic rod that will work - I was thinking of cutting a notch in it where the other will sit. And then attempt to build the rest around it
  5. Spaceman Spiff
    I wasn’t able to to do very much to it over the weekend asides from spraying primer on the flight deck (Tamiya fine grey). A tape test shows it adheres well, so that’s good. I’ll try to spray white on it tonight where the markings will go. While that dries, I’ll turn my attention to the smaller mast-thing found behind the island and shown in the pic from Dad’s cruise book. Have no idea how that will be made.
  6. Spaceman Spiff
    Time for a most deserved shout out to Mr Steve Larsen, aka Model Monkey, for service and products above and beyond! Not only are the parts of exceptional quality, but they fit perfectly, as shown. The parts were packaged perfectly and arrived much faster than expected! Thank you, sir!!!! Highly recommended!
  7. Spaceman Spiff
    Here are some of poor quality control. Note bubbles, holes. Misshapen. You’ve seen the original flight deck fit. This is a small, small sample amount
  8. Spaceman Spiff
    Thanks again for the kind words. The walkways are on. Have to build antenna mounts for the forward port walkways, add PE, assemble weapons, etc. The end is in sight. Although I will add PE after I paint the flight deck. attached are the latest.
  9. Spaceman Spiff
    I primarily build aircraft(1/48) but wanted to do Dad’s ship. While there may be decent resin models, have yet to see one that surpasses plastic. And they are generally much, much more expensive with twice the work. Yet, it’s about skill, etc. This one taught me a lot and I’m in the home stretch of building. Just a bit of PE to add, prime, and paint. I do need to check Dads cruise book again to make sure it had the little mini mast behind the island - some pics show it and some have it removed (not refitted but old with same armament, etc). Also purchased PE hose reels as found on the walkways. Need to also add cabinets, etc, because walkways were cluttered for most part. All walkways have been installed and are ready for PE. I’ll try to post pics tonight.
  10. Spaceman Spiff
    Just one. In reality, all I need is one tub. Thanks!!! Check your DMs
  11. Spaceman Spiff
    Thanks for the kind words. Resin is a whole different ball game. Far more difficult. You’ve seen my issues, and those are the ones I’ve posted. I’d have thrown it away, but it’s the only game in town for Dad’s ship. Would I buy another kit from them? Not only no, but hell no. Edit: So many parts have holes/bubbles, misshapen, bent, etc. very poor quality control. Several of the walkways were not included, so I’ve had to remake them out of sheet styrene.
  12. Spaceman Spiff
    The gun mount is 13mm across so should fit. How do I go about adding it to my existing order? Too bad you don’t make those gun mounts, as the kit ones are crap.
  13. Spaceman Spiff
    I will check when I get home - if they fit, could I include them with my current order to save shipping? Also, do you make that version Gun mount?
  14. Spaceman Spiff
    Thank you, Mr Larsen! Looking at your catalog I noticed 1/350 gun tubs for 3”/50 mounts (included pic from your catalog) - would they fit 3”/50 dual mount? If so, I only need one.
  15. Spaceman Spiff
    Ordered from him!
  16. Spaceman Spiff
    As not a scam
  17. Spaceman Spiff
    Thanks for that. The newer refits look much darker than the older ones and all are heavily weathered. Almost impossible to get a color, much less a near FS match. Fresh out the factory newer ones would be a black non-skid, so I may go with a dark grey (fs36076) lightened/toned with different colors. One thing for sure, all images show multi tones. Also, looking at the decals for the deck markings, there is so much carrier film I’d spent far too much time trimming, so decided to paint them. The decals are 2mm wide and I happen to have 2mm Tamiya tape. Will do the same for the # 11, as there are no decals for that. From the images they appear to be the same width as the markings, so 2mm they are. The older version of the ship had the numbers at both ends of the flight deck. But I’m not there yet, just planning ahead. Now, something I’ve ran into is that kit supplied life raft cases aren’t square shaped as in the old photos (mounted on walkway railings), but rather a pill shape. Haven’t been able to source any of those, so I may have to go out of era on that. Edit: found some by Model Monkey (1/350 early Cold War era life raft cases). Not sure if they are legit.
  18. Spaceman Spiff
    What is the best color to paint the flight deck? I’ve spent many hours on one but not sure if the 60s era decks were same color. I plane on doing an underway dio. The deck won’t be a solid/single color as they heavily weathered. Just looking for the base color. Something like black-grey?
  19. Spaceman Spiff
    Thanks for the reply! The top of the opening will by be cleaned up. The elevator will be in the up position. The crane isn’t glued in as I will glue in the overhang, too. The older version I’m modeling differed a bit from that of the kit, so I’m having to build extra stuff. Thanks for all you’ve done!
  20. Spaceman Spiff
    Work on the starboard walks and platforms. Based on old pictures, I had to splice the rear walk and add the curved section, hence the different colored resin. The white walks/platforms were built using sheet styrene. There was no kit part for the crane base, so I made it out of styrene. The included pic shows what I built (red arrows). Hopefully it turned out ok. Just a few more walkways/platforms to add, piping, etc, and she will be ready for the next step. Thoughts?
  21. Spaceman Spiff
    Small update. All port walkways are on. Have a lot of PE and small items which will be added later and make it look the part. Hopefully it will look good under paint.
  22. Spaceman Spiff
    Minor, minor update. After much filling, sanding, priming, filling, etc, and a hurricane, I managed to get a small amount done last night. The walks are starting to be put on. With the exception of one I will have to make from scratch, all walks are there. Starting to take life!
  23. Spaceman Spiff
    I got it the downloads to work - thank you! A little progress here and there. Slowly coming along. The white is sheet styrene cut to shape. The catwalks down the flight deck will blend the bottom in. There is a glimmer of light at the end of the tunnel!
  24. Spaceman Spiff
    Not sure but it won’t download that. I’d love to get those drawings.
  25. Spaceman Spiff
    I don’t have a pc/laptop at home and can’t do it at work, so it’s my iPhone lol

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...