Jump to content

Pete38

Members
  • Posts

    687
  • Joined

  • Last visited

Posts posted by Pete38

  1. Here is a few pictures of my meager progress for the month...Hopefully will have more time here soon to devote to the build.

     

    Using an old marking gauge I found in my pile of junk to lay out the line for the treenails. Originaly had a metal point to scratch the line but remove it drill the hole bigger

    and is using a pencil. Seems to work rather well.

    post-63-0-91125600-1375635079_thumb.jpg

     

    After marking use a sharp point to mark the hole locations so the bit will not wander.

    post-63-0-37881300-1375635214_thumb.jpg

     

    I found the cutting the treenails into short lengths instead of using one long and cutting each time it is inserted into the wood was easier for me. This gave me a small

    pile to work from.

    post-63-0-93926100-1375635348_thumb.jpg

     

    Put a few at a time next to where I am working so I don't have to hunt for them

    post-63-0-98589800-1375635354_thumb.jpg

     

    Once I get a few more in and some sanding done will post some more pictures. So back to the shop while I have time.

     

    Hopefully will not be as long between post next time.

  2. Sorry that I have not responded to your post. With summer here been hard to find time for the build.

     

    Paddy..Russ  thanks for the comments

     

    David the cherry is stay flat with no problems...so far.  The Cherry is a real @#&*# to pull...but I am getting there.

    Cherry is what I started with and will stay with it, even though it is hard to pull and get any treenails out of...I like the look

     

     Using the .030 kerf blade in the saw to rip the cherry strips to pull

     

     

  3. Small update...with summer not much time to work on the cross section.....just a little at a time

    Since I decided to go with cherry for the treenail.....don't know if this was a good idea or a really stupid one  :(

    Got down to making me some

     

    First I had to make a zero clearance insert for my saw...did not have any aluminium or plastic so I used cherry

     

    post-63-0-42446300-1372715325_thumb.jpg

     

    ripped some cherry strips down to about .040  square

     

    post-63-0-49602100-1372715366_thumb.jpg

     

    post-63-0-56132100-1372715372_thumb.jpg

     

    Then started pulling them through my draw plate. Taking them down to about .023 in size. This is smaller in scale than it should be at 1:32 but with them

    be so much darker than the maple the will not look like the section has a bad case of the measles....I hope  :blink:

     

    post-63-0-76555300-1372715413_thumb.jpg

     

    So now it is time to set back turn on the music and PULL for awhile

  4. Did not think it was this long since I posted in my log....need to keep it up better  :blush:

     

    Not a whole lot done but still at least moving forward...

     

    Finished up a section of the inside planking...still need to trim and a little sanding

     

    post-63-0-30506100-1372109984_thumb.jpg 

     

    post-63-0-20973000-1372109990_thumb.jpg

     

    Once the trimming and sanding are done plan to install the treenails...

     

    I am either going to use the bamboo or cherry for the nails

     

    Bamboo on the right and cherry next to it

     

    post-63-0-25324300-1372110056_thumb.jpg

     

    Leaning toward the cherry....will take some extra time...is not a forgiving when pulling through the drawplate...have to pay closer attention

     

    Thats all for now...hope to post more frequently with updates...

×
×
  • Create New...