cabrapente Posted March 10, 2013 Author #62 Posted March 10, 2013 the foremast and bowsprit .... cool fit very well
cabrapente Posted March 10, 2013 Author #63 Posted March 10, 2013 the cabin. to want to place the reel brake, I see that the front deck, this low, at least half a centimeter ... I got off the sleepers and upload, without starting anything.
cabrapente Posted March 10, 2013 Author #66 Posted March 10, 2013 I bought PROXXON grinder. is a very good machine. can be attached leaf cutting table. and I have made a useful, velcro sanding. Archi 1
cabrapente Posted March 10, 2013 Author #68 Posted March 10, 2013 scuppers start. finish the kitchen Archi 1
cabrapente Posted March 10, 2013 Author #69 Posted March 10, 2013 I changed the scuppers, by termoretractil covers gray to simulate lead. the base of the mast Archi 1
cabrapente Posted March 10, 2013 Author #72 Posted March 10, 2013 good after doing a second door, started the third.
cabrapente Posted March 10, 2013 Author #73 Posted March 10, 2013 February 2011. I start with the statue of the bow Archi 1
cabrapente Posted March 10, 2013 Author #75 Posted March 10, 2013 anchors start. the first, took off. Now I make a notch, and held even without soldering. I bow before limarla rod. since the first split.
cabrapente Posted March 10, 2013 Author #76 Posted March 10, 2013 side trims, came out very small. I have taken and I have others.
cabrapente Posted March 10, 2013 Author #77 Posted March 10, 2013 looking for a carpenter to buy pear tree, I found a man who has seen the boat, and is committed to giving me the trimmings that go. last week, made clean, and just had this ....... walnut, linden and center lot not remember the name. but assures me that saved me a lot more. I have had a small lottery. Archi 1
cabrapente Posted March 10, 2013 Author #78 Posted March 10, 2013 Good. The doctor gave me permission to play sports, and I've stuck a few days in the mountains. but I'm busy again. I smoothed square shaped tip, a brass rod and a nut, the screw is made.. tables lining and Compass
cabrapente Posted March 10, 2013 Author #81 Posted March 10, 2013 manufactured pulleys. my father, I have made anchors robin b 1
cabrapente Posted March 10, 2013 Author #82 Posted March 10, 2013 March 2011. I start the pot. I have problems. not the plane has missing lines. in the drawing below, put in orange, which I think is. I tried doing cuadernitas and do not get ... I think it would be easier with a standard tier. mold me crazy.
cabrapente Posted March 10, 2013 Author #83 Posted March 10, 2013 I think I nailed it. I made the mold, vertical cuts, and is marked, the situation of the frames. Also, I have perfect templates to build, with the surplus. some blocks
cabrapente Posted March 10, 2013 Author #85 Posted March 10, 2013 find a brass rod, with which I pulleys in under a minute. bigotas term and almost every club. Archi and robin b 2
cabrapente Posted March 10, 2013 Author #86 Posted March 10, 2013 I put the amberjacks. the flagpole on the bowsprit Archi, msberkman and robin b 3
cabrapente Posted March 10, 2013 Author #87 Posted March 10, 2013 ebony placed at 4 anchors. and pumps. to hold the strakes within the rabbet, I have placed a clamp chapita and above.
cabrapente Posted March 10, 2013 Author #88 Posted March 10, 2013 April 2011 heart cleats. start a block of boxwood for bracers.. I still have the boat.
cabrapente Posted March 10, 2013 Author #89 Posted March 10, 2013 After many attempts, I think I've got the hang
cabrapente Posted March 10, 2013 Author #90 Posted March 10, 2013 pulleys and cleats. I've made a "router" ..... robin b 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now