Jump to content

Recommended Posts

I am reoffering the St. Nectan kit. It was purchased in 2016 and unpacked to check contents. When I first offered the kit I didn't notice that there was a hull problem. There is a flaw in the keel. It is perfectly straight but sags about 1/8' to 1/4" in the middle (hogging). I checked with Mountfleet and this is a direct quote via email:

"Hi
They all have the same problem, our workshop boat also has one and as ours is sat on the shelf you can see it. I think it was obviously in the original plug.
it would probably be something that would be difficult to change Thanks Mountfleet models"

Otherwise the hull is perfectly straight. It still makes up into a beautiful model. With the bilge keels in place it will hardly be noticeable and will not affect the sailing.

 

I have included a picture of the hull with a straight edge on it to show the problem. I have a lot more pictures of the hull and if interested I will be happy to send them via email. The hull is actually in excellent condition except for the hogging problem at the keel.

As a result of the hull problem I am asking $795 plus shipping.  Shipping is about $120 - $140 to the North East Coast USA from 91307. The box is 71 x 14 x 12 and weighs 32 lbs.

 

Thanks for looking.
 

P1040663-001.JPG

P1040650-001.JPG

P1040649-001.JPG

P1040648-001.JPG

P1040647-001.JPG

P1040646-001.JPG

P1040645-001.JPG

P1040643-001.JPG

P1040644-001.JPG

Edited by ir3
Item Sold
Link to comment
Share on other sites

Thanks for the comments on the kit. It is quite a challenge. There are several very good build threads on the net as well as on MSW so there will be lots of support.

Link to comment
Share on other sites

  • 1 year later...
  • 2 months later...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...