Jump to content

Recommended Posts

Posted

Hi All,

I am building a Model Shipways Bluenose model.  When I purchased the kit from Model Expo, I bought the paint set at the same time.  I thought they would have the truest colors scheme.  When I airbrushed the Light Grey on the waterways, I had trouble with large goobers plugging the airbrush.  No amount of mixing or thinning would dissolve these.  See the attached picture.  Since then, I've read a lot of negative comments about Model Expo paints on this site, especially when used with an airbrush.  Is there a way to remedy this issue?  Or should I cut my losses and see if I can return the unused paint for a refund and purchase a better quality paint?  Would they even do that?

 

Thanks for any advise!

Ed

IMG_3198.JPG

Thanks & Best regards,

Ed Kutay

 

Current build: Model Shipways "Rattlesnake"

Completed build: Model Shipways "Bluenose I"

 

 

Posted

Hi Ed, 

I am sorry to hear about the issue with the MS paint.
When I bought my Bluenose the paint kit was included, however I never used it. It was way to thick to be used with an airbrush, even diluted.
I got Vallejo paint instead, which worked really well for me, this is just my experience. I know several others has used other brands of paint. 

I don't know whether ModelExpo will accept a return, but I would recommend to contact them and ask at least.

Finally, I just want to say :722972270:

Start a build log, so we can follow along and when you find yourself in a dilemma it will be easy for us to help you.

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Posted

I also had issues with the Model Expo paint and switched to Badger for airbrushing and Tamiya for brushing.

 

You could try to run your current paint through a nylon stocking to remove the lumps. Then use a quality extender or thinner. 

Current build: NRG Half Hull

Previous build: MS Bluenose 

Posted

Hi Guys, thanks for your replies.  I am going to at least contact Model Expo to see what they say.

 

I know I should start a build log.  But, I spend all my spare time building the ship!  Per, I think I'm turning into a Shipaholic!

 

I use both of your build logs and have gotten a ton of great information from them for my Bluenose.

 

Best to both of you!

Ed

Thanks & Best regards,

Ed Kutay

 

Current build: Model Shipways "Rattlesnake"

Completed build: Model Shipways "Bluenose I"

 

 

Posted

Ed, you a "Shipaholic" already? 
Oh my, well at least this therapy won't turn you away from ship modeling.😊
The therapy is open 24/7 but may not be staffed all the time (just me)🤨

And look into others Bluenose logs as well, there is a lot a "goodies" in our forum.

 

 

 

Please, visit our Facebook page!

 

Respectfully

 

Per aka Dr. Per@Therapy for Shipaholics 
593661798_Keepitreal-small.jpg.f8a2526a43b30479d4c1ffcf8b37175a.jpg

Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan

Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS

Viking funeral: Harley almost a Harvey

Nautical Research Guild Member - 'Taint a hobby if you gotta hurry

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...