Jump to content

Preac saw taper fixture


Recommended Posts

In my enthusiasm for needing some straight metal pieces for another jig, I took apart my old Preac saw taper fixture. Now I am ready to put it back together, I cannot remember for the life of me how this works. Could someone who has one of these post a picture so I can reassemble?

 

Always take a picture before disassembling, I will remind myself in the future....🥴

 

Best wishes,

 

Mark

 

IMG_9330.thumb.JPG.4b787056c5734e7559b36a8a88392d19.JPG

Link to comment
Share on other sites

You seem to have some extra pieces or a different model than I have.  Mine is definitely a Preac.

 

2084121939_preactaperjig.JPG.ca3fce4daaded010c6a1677d1a961894.JPG

Current builds:

Wingnut Wings AMC DH9

Model Shipways 1/48 Longboat

Model Shipways 1/24 Grand Banks Dory

 

Soon to start:

Fully framed Echo

 

Completed builds:

East Coast Oyster Sharpie

Echo Cross Section

1/48 Scratchbuilt Hannah from Hahn plans

1/64 Kitbashed Rattlesnake from Bob Hunt practicum

1/64 Brig Supply

Link to comment
Share on other sites

Hi Dave,

 

Thanks so much! His design must have changed over the years, but the concept remained the same. I realize I had one too many pieces I was looking at, and here is how it goes together.

 

Best wishes,

 

Mark

 

IMG_9331.thumb.JPG.04134ac65744518954de069ced9ec3d3.JPG

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...