SJSoane Posted September 16, 2020 #1 Posted September 16, 2020 In my enthusiasm for needing some straight metal pieces for another jig, I took apart my old Preac saw taper fixture. Now I am ready to put it back together, I cannot remember for the life of me how this works. Could someone who has one of these post a picture so I can reassemble? Always take a picture before disassembling, I will remind myself in the future....🥴 Best wishes, Mark Canute 1 Current build: HMS Bellona 74, ca. 1760, 1:64 http://modelshipworld.com/index.php?/topic/196-hms-bellona-by-sjsoane-scale-164-1760-as-designed/
davec Posted September 17, 2020 #2 Posted September 17, 2020 You seem to have some extra pieces or a different model than I have. Mine is definitely a Preac. mtaylor, Canute and Ryland Craze 3 Current builds: Wingnut Wings 1/32 Halberstadt Cl.II Model Shipways 1/48 Longboat Soon to start: Fully framed 1/48 Echo Completed ships and boats: Kitbashed Model Shipways 1/24 Grand Banks Dory 1/16 East Coast Oyster Sharpie 1/48 Echo Cross Section 1/48 Scratchbuilt Hannah from Hahn plans 1/64 Kitbashed Rattlesnake from Bob Hunt practicum 1/64 Brig Supply Completed non-ships: Kotare 1/32 Spitfire Mk.Ia Wingnut Wings 1/32 AMC DH9
SJSoane Posted September 17, 2020 Author #3 Posted September 17, 2020 Hi Dave, Thanks so much! His design must have changed over the years, but the concept remained the same. I realize I had one too many pieces I was looking at, and here is how it goes together. Best wishes, Mark mtaylor, Ryland Craze and Canute 3 Current build: HMS Bellona 74, ca. 1760, 1:64 http://modelshipworld.com/index.php?/topic/196-hms-bellona-by-sjsoane-scale-164-1760-as-designed/
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now